Related Manuals for Jetson Warren
Summary of Contents for Jetson Warren
- Page 1 Warren All-Terrain Electric Bike. A guide for your ride. IMPORTANT: READ CAREFULLY AND RETAIN FOR FUTURE REFERENCE. MODEL: JWRNFT-GRY...
- Page 3 Jetson's top two riding rules: Be safe. Have fun!
-
Page 4: Table Of Contents
Contents Safety Warnings ................................4 Warranty Coverage ..............................7 Product Overview ..............................8 Specs & Features ..............................12 Online Resources ..............................13 1. Getting Started Starting Notes ..............................14 Unfolding & Folding the Frame ...........................15 Unfolding & Folding the Stem ..........................21 Unfolding & Folding the Pedals ...........................25 Installing the Seat ..............................26... - Page 5 3. Features & Functions Removing & Reinserting the Battery ........................40 Using the Kickstand .............................45 Understanding & Using the LCD Screen ......................46 Changing the Display ............................47 Checking Battery Charge Level ...........................48 Using the Headlight ..............................49 Sounding the Horn ..............................49 Using Walk Assist ..............................49 4.
-
Page 6: Safety Warnings
Safety Warnings • Before use, please read the user manual and safety warnings carefully, and make sure you understand and accept all the safety instructions. The user will be responsible for any loss or damage caused by improper use. • Failure to use correct charger can result in fire and explosion. •... - Page 7 • Applying brakes too hard or too suddenly can lock up a wheel, which could cause you to lose control and fall. Sudden or excessive application of the brake may result in injury or death. • If the brake loosens, please adjust with the hexagon wrench, or please contact the Jetson Care Team. • Replace worn or broken parts immediately.
- Page 8 For all maintenance repairs and needs beyond the capability of the consumer, which may include but not be limited to: such as proper maintenance of brakes, control cables, bearing adjustments, wheel adjustments, lubrication, reflectors, tires and handlebar and seat adjustments, please contact the Jetson Care Team for assistance at: ridejetson.com/chat ridejetson.com/support...
-
Page 9: Warranty Coverage
ONE-YEAR GENERAL LIMITED WARRANTY All new Jetson products are warranted against defects in materials and workmanship for a period of one year from the date of original retail purchase when used in accordance with Jetson's user manuals (refer to ridejetson.com/support). -
Page 10: Product Overview
Product Overview HANDLEBAR (DETAILS PAGE 10) MUDGUARD (X2; FRONT & REAR) TELESCOPING STEM FOLDING MAGNET (X2; FRONT & REAR) STEM CLAMP DISC BRAKE (X2; FRONT & REAR) STEM LOCKING LATCH PEDAL (X2; LEFT & RIGHT) HEADLIGHT CRANKSET FRONT FORK BIKE STAND FRAME MOTOR FRAME LOCKING LATCH... - Page 11 NOTE: IMAGES MAY NOT REFLECT EXACT APPEARANCE OF ACTUAL PRODUCT.
- Page 12 HANDLEBAR LCD SCREEN GEAR SETTING POWER BUTTON TWIST THROTTLE RIGHT/FRONT HANDBRAKE "+" BUTTON LEFT/FRONT HANDBRAKE SETTINGS BUTTON "-" BUTTON GEAR UPSHIFT LEVER FRONT REFLECTOR LIGHT BUTTON GEAR DOWNSHIFT BUTTON HORN BUTTON HANDLEBAR CLAMP...
- Page 13 MULTI-TOOL INCLUDED FOR ASSEMBLY, TIGHTENING, AND MAINTENANCE: TIP IDENTIFICATION: 6MM ALLEN KEY FLAT-HEAD SCREWDRIVER 5MM ALLEN KEY 10MM SOCKET 4MM ALLEN KEY 9MM SOCKET 2MM ALLEN KEY 8MM SOCKET 2.5MM ALLEN KEY 14 GAUGE SPOKE WRENCH 2MM ALLEN KEY 8MM HEX WRENCH SOCKET SCREW 15MM HEX WRENCH PHILLIPS-HEAD SCREWDRIVER...
-
Page 14: Specs & Features
Specs & Features • PRODUCT DIMENSIONS, UNFOLDED: 67.8″ (L) × 23.4″ (W) × 46.1″ (H) • PRODUCT DIMENSIONS, FOLDED: 38.6″ (L) × 18.1″ (W) × 31.9″ (H) • PRODUCT WEIGHT: 63.3 LBS • TIRE SIZE: 20″ • BATTERY: 48V, 10AH LITHIUM-ION •... -
Page 15: Online Resources
Online Resources Scan for our most updated Warren onboarding materials and support resources. -
Page 16: Getting Started Starting Notes
1. Getting Started Starting Notes · REMOVE ALL PROTECTIVE PACKAGING PIECES PRIOR TO ASSEMBLY AND SET-UP. · THE DIRECTIONS GIVEN IN THIS ARTICLE—RIGHT, LEFT, FRONT/FORWARD, AND REAR/BACK—ARE ORIENTED AS THE RIDER WOULD SEE THEM WHEN SEATED ON THE BIKE. THE "RIGHT SIDE" OF THE BIKE, FOR EXAMPLE, IS THE SIDE WHERE THE RIDER’S RIGHT HAND AND FOOT WILL BE. -
Page 17: Unfolding & Folding The Frame
Unfolding & Folding the Frame WHEN TO UNFOLD: FOR RIDING AND ADJUSTMENT. WHEN TO FOLD: FOR STORAGE AND TRANSPORT. IMPORTANT: NEVER RIDE THE WARREN WITHOUT THE FRAME LOCKING LATCH CLOSED AND THE FRAME SECURED IN THE RIDING POSITION. UNFOLDED FOLDED... - Page 18 TO UNFOLD 1. POSITION THE BIKE UPRIGHT ON THE BIKE STAND. 2. IF THE MAGNETS ON THE FRONT AND REAR WHEEL ARE COUPLED, DISCONNECT THEM BY PULLING THE FRONT AND REAR WHEELS AWAY FROM ONE ANOTHER. REAR WHEEL FRONT WHEEL MAGNET MAGNET BIKE STAND...
- Page 19 3. PIVOT THE FRONT OF THE BIKE AROUND THE HINGE POINT UNTIL THE FRONT AND BACK OF THE FRAME FORM A STRAIGHT LINE.
- Page 20 4. HOLD BOTH ENDS OF THE FRAME STEADY AND FORCEFULLY PUSH THE FRAME LOCKING LATCH CLOSED. IMPORTANT: TO ENSURE THAT THE LATCH IS PROPERLY CLOSED AND SECURE ON THE BIKE FRAME, MAKE SURE THAT THE LATCH "CLICKS" CLOSED. FRAME LOCKING LATCH...
- Page 21 TO FOLD 1. PUSH AND HOLD THE TAB ON THE FRAME LOCKING LATCH FORWARD (1A), THEN FORCEFULLY PULL THE LATCH OPEN (1B). FRAME LOCKING LATCH...
- Page 22 2. PIVOT THE FRONT OF THE BIKE TO THE LEFT AND AROUND TOWARDS THE REAR OF THE BIKE UNTIL THE FRONT WHEEL IS NEXT TO THE REAR WHEEL AND THE MAGNETS ON THE TWO WHEELS ARE ALIGNED. 3. PUSH THE TWO WHEELS TOGETHER SO THAT THE MAGNETS CONNECT, SECURING THE BIKE IN THE FOLDED POSITION. 4.
-
Page 23: Unfolding & Folding The Stem
Unfolding & Folding the Stem WHEN TO UNFOLD: FOR RIDING AND ADJUSTMENT. WHEN TO FOLD: FOR STORAGE AND TRANSPORT. IMPORTANT: NEVER RIDE THE WARREN WITHOUT THE HANDLEBAR UPRIGHT AND THE STEM LOCKING LATCH SECURELY CLOSED. TO RAISE THE STEM: 1. RAISE THE STEM UP UNTIL IT IS FULLY UPRIGHT AND RESTING ON THE STEM BASE. - Page 24 2. FORCEFULLY PUSH THE STEM LOCKING LATCH CLOSED AGAINST THE STEM. IMPORTANT: TO ENSURE THAT THE LATCH IS PROPERLY CLOSED AND SECURE ON THE STEM, MAKE SURE THAT THE LATCH "CLICKS" CLOSED STEM LOCKING LATCH...
- Page 25 TO LOWER THE STEM: 1. PUSH AND HOLD THE TAB ON THE STEM LOCKING LATCH UP (1A), THEN FORCEFULLY PULL THE STEM LOCKING LATCH OPEN (1B). STEM LOCKING LATCH...
- Page 26 2. PIVOT THE TOP OF THE STEM DOWN ON THE RIGHT SIDE OF THE BIKE. STEM...
-
Page 27: Unfolding & Folding The Pedals
PEDAL MIDDLE BAR FOLDED UNFOLDED Unfolding & Folding the Pedals FOR STORAGE IN COMPACT SPACES, TUCK THE PEDALS UP AND OUT OF THE WAY. TO FOLD: 1. ROTATE ONE PEDAL SO THAT IT IS HORIZONTAL AND PARALLEL TO THE FLOOR. 2. -
Page 28: Installing The Seat
"MINIMUM INSERTION" MARK SEAT POST Installing the Seat 1. PULL OPEN THE LATCH ON THE SEAT CLAMP. 2. LOCATE THE "MINIMUM INSERTION" MARK NEAR THE BOTTOM OF THE SEAT POST. 3. HOLD THE SEAT IN POSITION ABOVE THE SEAT CLAMP BIKE, WITH THE WIDEST PART OF THE SEAT SEAT TUBE AT THE REAR. - Page 29 5. WHILE HOLDING THE SEAT AT THE DESIRED HEIGHT, CLOSE THE LATCH ON THE SEAT CLAMP. IF NECESSARY, TIGHTEN THE CLAMP BY TURNING THE KNOB CLOCKWISE WITH THE 5MM ALLEN KEY TIP OF THE MULTITOOL. 6. CHECK THAT THE SEAT IS SECURE: USE YOUR HAND TO PUT DOWNWARD PRESSURE ON THE SADDLE.
-
Page 30: Securing The Front Reflector
Securing the Front Reflector 1. ROTATE THE FRONT REFLECTOR AROUND THE HANDLEBAR UNTIL THE REFLECTOR IS FACING THE FRONT OF THE BIKE. 2. TIGHTEN THE REFLECTOR CLAMP BY TURNING THE SCREW CLOCKWISE WITH THE PHILLIPS-HEAD SCREWDRIVER TIP OF THE MULTI-TOOL. PHILIPS-HEAD SCREWDRIVER REFLECTOR CLAMP FRONT REFLECTOR... -
Page 31: Preparing To Ride
2. Preparing to Ride Adjusting Handlebar Height 1. PULL OPEN THE LATCH ON THE STEM CLAMP. 2. LOOSEN THE CLAMP KNOB BY TURNING IT COUNTERCLOCKWISE. 3. RAISE OR LOWER THE STEM UNTIL THE HANDLEBAR IS AT THE DESIRED HEIGHT. IMPORTANT: NEVER RAISE THE HANDLEBAR SUCH THAT THE "MINIMUM INSERTION"... -
Page 32: Adjusting Handlebar Rotation
Adjusting Handlebar Rotation THE HANDLEBAR CAN BE ROTATED SLIGHTLY FORWARD OR BACKWARDS SO THAT ALL OF THE FEATURES AND FUNCTIONS ON IT ARE IDEALLY POSITIONED FOR THE RIDER. THE HANDBRAKES, ESPECIALLY, SHOULD BE IN A POSITION THAT MAKES THEM EASY FOR THE RIDER TO GRIP. - Page 33 2. ROTATE THE HANDLEBAR FORWARD OR BACKWARD TO REPOSITION IT. 3. WHILE HOLDING THE HANDLEBAR IN THE NEW POSITION WITH ONE HAND, USE THE OTHER HAND TO PUSH THE LATCH DOWN AND BACK INTO THE CLOSED (LATCHED) POSITION. IMPORTANT: IF THE HANDLEBAR DOES NOT STAY SECURE WITH THE CLAMP CLOSED AROUND IT, YOU NEED TO TIGHTEN THE CLAMP.
-
Page 34: Adjusting Seat Height
Adjusting Seat Height SEAT WHEN A RIDER IS SEATED AND HAS A FOOT ON THE PEDAL AT THE LOWEST PEDAL ROTATION POINT, THERE SHOULD BE A SMALL BEND IN THE RIDER’S KNEE. LEGS SHOULD NEVER BE FULLY EXTENDED DURING PEDALING. ADJUST THE SEAT HEIGHT ACCORDINGLY UNTIL IT IS IN THE IDEAL POSITION FOR PEDALING. -
Page 35: Charging The Battery
Charging the Battery IT CAN TAKE ABOUT 6 HOURS TO BRING A DEPLETED BATTERY TO FULL CHARGE. THE BATTERY CAN BE CHARGED WHEN IT IS SECURED IN THE FRAME OR REMOVED FROM THE FRAME. (SEE PAGE 39 FOR OUT-OF-FRAME REMOVAL.) CHARGING PORT BATTERY 1. - Page 36 IMPORTANT CHARGING NOTES: · ONLY USE THE INCLUDED CHARGER OR ONE OBTAINED DIRECTLY THROUGH JETSON LABELED WITH: C120-V546A20 FAILURE TO USE CORRECT CHARGER CAN RESULT IN FIRE AND EXPLOSION. · ALWAYS KEEP THE CHARGING PORT CLOSED WHEN NOT ACTIVELY CHARGING THE BATTERY.
-
Page 37: Tire Inflation & Pressure
BY TWISTING IT ON CLOCKWISE. 4. REPEAT WITH THE OTHER TIRE. IMPORTANT: ONLY USE A MANUAL AIR PUMP TO INFLATE THE TIRES ON YOUR WARREN. NEVER USE AN AIR COMPRESSOR; DOING SO MAY CAUSE THE TIRE TUBES TO POP. DUST CAP... -
Page 38: Checking & Adjusting The Brakes
Checking & Adjusting the Brakes BRAKE SAFETY & FUNCTIONALITY CHECK AFTER ASSEMBLY AND PRIOR TO EVERY RIDE, CHECK THAT THE BRAKES ARE FUNCTIONING PROPERLY AND SAFELY TO SLOW THE WHEEL DOWN AND BRING IT TO A STOP BY PERFORMING THE FOLLOWING STEPS: 1. - Page 39 4. WHEN LOOKING AT THE CALIPER FROM THE BACK OF THE WHEEL, LOCATE THE BOLT ABOVE AND THE BOLT BELOW THE CALIPER. USE THE 5MM ALLEN KEY TO EACH BOLT BY TURNING IT COUNTERCLOCKWISE FOR 4 - 5 ROTATIONS. 5. MOVE THE CALIPER OUT OF ALIGNMENT UNTIL THE FOLLOWING CONDITIONS ARE MET: ·...
-
Page 40: Powering On & Off
Powering On & Off TO TURN YOUR E-BIKE ON OR OFF, PRESS AND HOLD THE POWER BUTTON FOR 2 - 3 SECONDS. TO PRESERVE BATTERY POWER, YOUR BIKE WILL AUTOMATICALLY POWER AFTER 10 MINUTES WITHOUT MOVEMENT. ALWAYS REMEMBER TO POWER OFF YOUR BIKE WHEN PUTTING IT AWAY. IMPORTANT: NEVER POWER ON YOUR E-BIKE WHILE IT IS CHARGING OR FOLDED. -
Page 42: Features & Functions
1. HOME POSITION: THE BATTERY IS LOCKED IN THE FRAME, AND THE KEY CAN BE INSERTED AND REMOVED FROM THE KEYHOLE. NOTE: THE WARREN ARRIVES WITH THE LOCK IN HOME POSITION. 2. LOCKED POSITION: THE BATTERY AND THE KEY ARE LOCKED INTO THE FRAME, AND THE KEY WILL REMAIN IN PLACE THERE WHILE YOU RIDE. - Page 43 TO REMOVE THE BATTERY: 1. PUSH AND HOLD THE TAB ON THE FRAME LOCKING LATCH FORWARD (1A), THEN FORCEFULLY PULL THE LATCH OPEN (1B). PIVOT THE BIKE AT THE FOLDING POINT TO REVEAL THE BATTERY (1C). FRAME LOCKING LATCH BATTERY...
- Page 44 2. INSERT ONE KEY INTO THE KEYHOLE WHILE THE LOCK IS IN HOME POSITION. PUSH THE KEY UP AND TURN IT COUNTERCLOCKWISE 90 DEGREES TO SET THE UNLOCKED POSITION. REMOVE THE KEY FROM THE KEYHOLE. KEYHOLE (HOME POSITION) 90°...
- Page 45 3. PULL THE BATTERY HANDLE UP AND USE THE HANDLE TO PULL THE BATTERY OUT OF THE BATTERY COMPARTMENT. BATTERY COMPARTMENT BATTERY BATTERY HANDLE...
- Page 46 TO REINSERT THE BATTERY: 1. SLOWLY PUSH THE BATTERY INTO THE BATTERY COMPARTMENT, ENSURING THAT THE BACK OF THE BATTERY LINES UP WITH THE PLUGS AT THE BACK OF THE BATTERY COMPARTMENT. 2. INSERT ONE KEY IN THE KEYHOLE. • TO SET THE HOME POSITION, IN WHICH THE BATTERY IS LOCKED BUT YOU CAN REMOVE THE KEY, TURN THE KEY CLOCKWISE 90 DEGREES (SEE PAGE 40.) REMOVE THE KEY FROM THE HEY HOLE AND CHECK THAT THE BATTERY IS SECURED INSIDE THE FRAME.
-
Page 47: Using The Kickstand
KICKSTAND Using the Kickstand TO USE THE KICKSTAND, PIVOT IT DOWN AND GENTLY TILT YOUR BIKE ONTO IT TO STAND. TO RAISE THE KICKSTAND, PIVOT IT BACK UP. IMPORTANT: ALWAYS RAISE THE KICKSTAND BEFORE RIDING. -
Page 48: Understanding & Using The Lcd Screen
Understanding & Using the LCD Screen WALK ASSIST ON (PAGE 49) HEADLIGHT ON (PAGE 49) BATTERY CHARGE INDICATOR "+" BUTTON (PAGE 48) PEDAL ASSIST MODE (PAGE 51) SETTINGS BUTTON SPEED "-" BUTTON ODOMETER (PAGE 47) HEADLIGHT BUTTON HORN BUTTON... -
Page 49: Changing The Display
IMPORTANT: IF ONE OF THE FOLLOWING ICONS ILLUMINATES ON YOUR LCD SCREEN, CONTACT THE JETSON CARE TEAM AT RIDEJETSON.COM/CHAT FOR ASSISTANCE BEFORE RIDING YOUR WARREN AGAIN. E C U Changing the Display QUICK-PRESS THE SETTINGS BUTTON TO TOGGLE BETWEEN FOUR DIFFERENT DISPLAYS: •... -
Page 50: Checking Battery Charge Level
51 % - 75 % 26 % - 50% (CHARGE YOUR PERCENTAGE WARREN NOW!) IMPORTANT: YOUR BIKE’S ABILITY TO REACH TOP SPEED CAN BE AFFECTED BY THE BATTERY CHARGE LEVEL. YOU MAY NOTICE A REDUCTION IN SPEED WHEN BATTERY CHARGE DIPS BELOW 25%. -
Page 51: Using The Headlight
Using the Headlight IF RIDING IN LOW LIGHT CONDITIONS, TURN ON THE HEADLIGHT SO YOU CAN BETTER SEE THE ROAD AHEAD AND ONCOMING RIDERS CAN BETTER SEE YOU. THE HEADLIGHT CAN ONLY POWER ON WHEN THE MOTOR IS ALSO TURNED ON. TO TURN ON OR OFF THE HEADLIGHT, QUICK-PRESS THE HEADLIGHT BUTTON. -
Page 53: Making Moves
25.7 KM/H 32.2 KM/H THE WARREN FEATURES CADENCE-BASED PEDAL ASSISTANCE, IN WHICH THE MOTOR WILL DELIVER SUPPLEMENTAL POWER WHENEVER YOU ARE PEDALING. ANY ROTATIONAL EFFORT THAT YOU PUT INTO THE PEDALS WILL TELL THE MOTOR TO TURN ON—SO YOU CAN WORK YOUR MUSCLES AS LITTLE OR AS MUCH AS YOU’D LIKE. -
Page 54: Using The Throttle
THE MAXIMUM SPEED AT WHICH THE BIKE CAN TRAVEL USING ALL-MOTOR POWER IS 20 MPH/ 32.2 KM/H. TO RIDE THE WARREN LIKE A MOTOR BIKE, STOP PEDALING AND KEEP YOUR FEET RESTING ON THE PEDALS. TO ACCELERATE, SLOWLY ROTATE THE THROTTLE TOWARDS YOU WITH YOUR RIGHT HAND. -
Page 55: Using The Gears
Using the Gears THE WARREN IS A 7-GEAR BIKE. UPSHIFT LEVER LOWER GEARS MAKE FOR EASIER PEDALING BECAUSE THERE IS LESS RESISTANCE, BUT YOU’LL COVER LESS GROUND WITH EACH PEDAL STROKE. USE LOW GEARS FOR RIDING UPHILL, TACKING ROUGH TERRAIN, OR TO RIDE SLOWLY. -
Page 56: Using The Brakes
Using the Brakes SQUEEZE ONE OR BOTH HANDBRAKES TO SLOW DOWN; SQUEEZE MORE FORCEFULLY TO COME TO A COMPLETE STOP. TO AVOID ABRUPT MOVEMENTS, TRY TO SQUEEZE THE HANDBRAKE(S) GRADUALLY. LEFT HANDBRAKE FRONT WHEEL BRAKE RIGHT HANDBRAKE REAR WHEEL BRAKE FRONT WHEEL HANDBRAKE REAR WHEEL HANDBRAKE... -
Page 57: Maximizing Speed & Riding Range
BATTERY FASTER THAN USING PEDAL ASSIST. · AIR TEMPERATURE – THE IDEAL TEMPERATURE FOR RIDING AND STORING THE WARREN IS BETWEEN 50 - 90°F (10 - 35°C). · INCLINE – THE MOTOR HAS TO WORK HARDER ON UPHILLS THAN ON FLAT STRETCHES OR DOWNHILLS, DRAINING THE BATTERY FASTER. -
Page 59: Safe Journeying Pre-Ride Safety Checks
5. Safe Journeying Pre-Ride Safety Checks CONDUCT THESE IMPORTANT SAFETY CHECKS BEFORE EVERY JOURNEY: BRAKES MAKE SURE THE BRAKES WORK PROPERLY SUCH THAT: · THE HANDBRAKE LEVERS ARE SECURED TO THE HANDLEBAR AND LUBRICATED SO THEY COMPRESS EASILY. · THE BRAKE PADS ARE NOT WORN, AND ARE CENTERED AND ALIGNED WITH THE ROTOR. CRANKS &... -
Page 60: Helmet Safety
Helmet Safety A HELMET SHOULD BE WORN BY THE RIDER AT ALL TIMES. PROPER POSITIONING: IMPROPER POSITIONING: THE FOREHEAD IS COVERED THE FOREHEAD IS EXPOSED. BY THE HELMET. A FALL COULD RESULT IN SERIOUS INJURY. * WEAR A HELMET, APPROPRIATE CLOTHING, SHOES, AND SAFETY GEAR. AVOID CLOTHING THAT CAN GET CAUGHT INTO OR UNDER THE WHEELS. -
Page 61: Care & Maintenance
Care & Maintenance TAKE GOOD CARE OF YOUR E-BIKE TO KEEP IT RIDING SMOOTHLY AND SAFELY. HERE’S HOW: HANDLING YOUR WARREN · AVOID EXPOSING YOUR WARREN TO SEVERE VIBRATION OR INTENSE PHYSICAL IMPACT. · NEVER DISASSEMBLE THE BATTERY. · KEEP YOUR WARREN AWAY FROM WATER AND MOISTURE. - Page 62 Stay connected. Be sure to follow @ridejetson on social media to learn about fantastic offers, giveaways, and all the latest Jetson news. Loving your ride? Then be sure to leave a review at ridejetson.com/reviews. We can’t wait to hear from you!
- Page 64 Date Code: 06/2023 Document Edition: v2.0 © 2023, JETSON. ALL RIGHTS RESERVED. Manufactured by JETSON ELECTRIC BIKES LLC. No portion of this document, including shape, copy, graphics, and design, may be reproduced or transmitted in any form or by any means.
Need help?
Do you have a question about the Warren and is the answer not in the manual?
Questions and answers
Are you kidding me? $45 dollars a month to get a technical answer. Is this a scam or bad p.r. I **** in shock!!!
Не работают амортизаторы. Как отрегулировать?