Related Manuals for Jetson Haze
Summary of Contents for Jetson Haze
- Page 1 Haze Folding Electric Bike. A guide for your ride. IMPORTANT: READ CAREFULLY AND RETAIN FOR FUTURE REFERENCE. MODELS: JHAZE-BLK | JHAZE-BLK-OB | JHAZE-CAN-BLK | JHAZE-BLK-RA Designed in Brooklyn...
- Page 3 Jetson's top two riding rules: Be safe. Have fun!
-
Page 4: Table Of Contents
Contents Safety Warnings ................................4 Pre-Ride Safety Checklist ............................7 Warranty Coverage ..............................8 Product Overview ..............................10 Specs & Features ..............................12 Rider Suitability ................................12 Online Resources ..............................13 1. Getting Started Unfolding & Folding the Frame ..........................14 Folding & Unfolding the Stem ..........................20 Attaching the Seat ..............................24 Attaching the Pedals ............................26... - Page 5 ...........................44 Using the Lights ..............................44 Using the Bell ................................44 Using the Kickstand .............................45 Tucking Away the Pedals ............................46 3. Making Moves Riding the Haze ..............................48 Using Pedal Assist ............................49 Using the Throttle ..............................50 Activating Cruise Control ............................51 Traditional Biking ..............................52 Using the Brakes ..............................53...
-
Page 6: Safety Warnings
That all guards and pads originally supplied by the manufacturer are in proper place and in serviceable condition; That the braking system is functioning properly; That any and all Haze guards, chain guards, or other covers or guards supplied by the manufacturer are in place and in serviceable condition; That tires are in good condition, inflated properly, and have sufficient tread remaining;... - Page 7 • Applying brakes too hard or too suddenly can lock up a wheel, which could cause you to lose control and fall. Sudden or excessive application of the brake may result in injury or death. • If the brake loosens, please adjust with the hexagon wrench, or please contact the Jetson Care Team. • Replace worn or broken parts immediately.
- Page 8 For all maintenance repairs and needs beyond the capability of the consumer, which may include but not be limited to: such as proper maintenance of brakes, control cables, bearing adjustments, wheel adjustments, lubrication, reflectors, tires and handlebar and seat adjustments, please contact the Jetson Care Team for assistance at: ridejetson.com/chat ridejetson.com/support...
-
Page 9: Pre-Ride Safety Checklist
Pre-Ride Safety Checks CONDUCT THESE IMPORTANT SAFETY CHECKS BEFORE EVERY RIDE: BRAKES • MAKE SURE BRAKES WORK PROPERLY. • CHECK THAT THE BRAKE PADS ARE NOT WORN, AND ARE ALIGNED AND CENTERED CORRECTLY. • CHECK THAT THE BRAKE CONTROL LEVERS ARE LUBRICATED AND ARE SECURED TO THE HANDLEBAR. STEERING •... -
Page 10: Warranty Coverage
Your new Jetson product is warranted against defects in materials and workmanship as indicated on ridejetson.com/warranty for a period of time from the date of original retail purchase when used in accordance with Jetson's user manuals (refer to ridejetson.com/support). Under this warranty, you will be able to direct your claims to Jetson even in situations where you purchased the Jetson Product from one of our authorized retailers. -
Page 12: Product Overview
Product Overview 1. HEADLIGHT 4. FRAME 17. KICKSTAND 2. STEM FOLDING LATCH 5. FRAME FOLDING LATCH 18. TIRE VALVE WITH DUST CAP 3. HANDLEBAR* 6. SEAT* (X2; FRONT AND REAR) a. LEFT HANDBRAKE 7. REAR REFLECTOR 19. CHAIN (FRONT WHEEL) 8. - Page 13 NOTE: IMAGES MAY NOT REFLECT EXACT APPEARANCE OF ACTUAL PRODUCT.
-
Page 14: Specs & Features
Specs & Features • MAX RANGE WITH THROTTLE : 15 MILES (24.1 KM) • UNFOLDED DIMENSIONS: 53.1″ (L) × 42.5″ (H) × 20.5″ (W) • MAX RANGE WITH PEDAL ASSIST : 20 MILES (32.2 KM) (135 CM × 108 CM × 52 CM) • BATTERY : 48V, 7.5AH LITHIUM-ION • FOLDED DIMENSIONS: 30.1″ (L) × 27.5″ (H) × 17.5″ (W) •... -
Page 15: Getting Started
1. Getting Started STARTING NOTES: · REMOVE ALL PACKAGING BEFORE BEGINNING ASSEMBLY. · THE DIRECTIONS GIVEN IN THIS MANUAL—RIGHT, LEFT, FRONT/FORWARD, AND REAR/BACK—ARE ORIENTED AS THE RIDER WOULD SEE THEM WHEN SEATED ON THE BIKE. THE "RIGHT SIDE" OF THE BIKE, FOR EXAMPLE, IS THE SIDE WHERE THE RIDER’S RIGHT HAND AND FOOT WILL BE. - Page 16 HOW TO UNFOLD: 1. POSITION THE BIKE UPRIGHT. 2. IF THE MAGNETS ON THE FRONT AND REAR WHEEL ARE COUPLED, DISCONNECT THEM BY PULLING THE FRONT AND REAR WHEELS AWAY FROM ONE ANOTHER. 3. HOLD THE REAR OF THE BIKE STEADY WHILE YOU PIVOT THE FRONT OF THE BIKE AROUND THE HINGE POINT TO PUT THE FRAME IN A STRAIGHT LINE.
- Page 17 4. LOWER THE KICKSTAND AND USE IT TO PROP THE BIKE UPRIGHT. (SEE PAGE 45.) KICKSTAND...
- Page 18 FRAME HINGE POINT FOLDING LATCH FRAME 5. HOLD THE FRAME STEADY AT THE HINGE POINT AND FORCEFULLY PUSH THE FOLDING LATCH CLOSED AGAINST THE BIKE FRAME. IMPORTANT: TO ENSURE THAT THE LATCH IS PROPERLY CLOSED AND SECURE ON THE BIKE FRAME, MAKE SURE THAT THE LATCH "CLICKS"...
- Page 19 FOLDING LATCH FOLDING LATCH TAB HOW TO FOLD: 1. PUSH THE TAB ON THE FOLDING LATCH FORWARD. 2. WITH THE TAB PUSHED FORWARD, FORCEFULLY PULL THE FOLDING LATCH OPEN AND AWAY FROM THE BIKE FRAME.
- Page 20 3. AT THE HINGE POINT, PIVOT THE FRONT OF THE BIKE AROUND TO THE LEFT UNTIL THE FRONT WHEEL IS NEXT TO THE REAR WHEEL, AND THE MAGNETS ON THE TWO WHEELS ARE ALIGNED. 4. PUSH THE TWO WHEELS TOGETHER SO THAT THE MAGNETS CONNECT, SECURING THE BIKE IN THE FOLDED POSITION. REAR WHEEL LOCKING MAGNET FRONT WHEEL LOCKING MAGNET...
-
Page 21: Folding & Unfolding The Stem
Folding & Unfolding the Stem WHEN TO RAISE: FOR ASSEMBLY AND RIDING WHEN TO LOWER: FOR STORAGE AND TRANSPORT HOW TO RAISE THE STEM: 1. RAISE THE STEM UP AND OVER THE HINGE POINT UNTIL IT IS FULLY UPRIGHT ON THE STEM BASE. - Page 22 AGAINST THE STEM. IMPORTANT: TO ENSURE THAT THE LATCH IS PROPERLY CLOSED AND SECURE ON THE BIKE FRAME, MAKE SURE THAT THE LATCH "CLICKS" INTO PLACE. IMPORTANT: NEVER RIDE THE HAZE WITHOUT THE HANDLEBAR UPRIGHT AND THE STEM LATCH SECURELY CLOSED.
- Page 23 STEM FOLDING LATCH HOW TO LOWER THE STEM: 1. PUSH THE TAB ON THE FOLDING LATCH UP. 2. WITH THE TAB PUSHED UP, FORCEFULLY PULL THE FOLDING LATCH OPEN AND AWAY FROM THE STEM.
- Page 24 3. AT THE HINGE POINT, PIVOT THE STEM DOWN TOWARDS THE GROUND ON THE RIGHT SIDE OF THE BIKE.
-
Page 25: Attaching The Seat
Attaching the Seat 1. PULL OPEN THE LATCH ON THE SEAT CLAMP. 2. LOCATE THE "MINIMUM INSERTION" MARK ENGRAVED NEAR SEAT POST THE BOTTOM OF THE SEAT POST. 3. HOLD THE SEAT IN POSITION ABOVE THE BIKE. "MINIMUM INSERTION" LINE 4. - Page 26 5. WHILE HOLDING THE SEAT AT THE DESIRED HEIGHT, CLOSE THE LATCH ON THE CLAMP. 6. CHECK THAT THE SEAT IS SECURE: USE YOUR HAND TO PUT DOWNWARD PRESSURE ON THE SADDLE. IF THE SEAT POST SLIPS FURTHER DOWN INTO THE TUBE, BRING IT BACK TO POSITION AND TIGHTEN THE CLAMP BY TURNING THE KNOB CLOCKWISE.
-
Page 27: Attaching The Pedals
Attaching the Pedals 1. ALIGN THE SPINDLE ON PEDAL MARKED "R" WITH THE HOLE AT THE END OF THE CRANK ARM ON THE SIDE OF THE BIKE WHERE YOU WILL PEDAL WITH YOUR RIGHT FOOT. 2. HOLD THE PEDAL BASE STEADY AND, TAKING CARE THAT THE SPINDLE ENTERS THE HOLE STRAIGHT, USE YOUR OTHER HAND TO TWIST THE SPINDLE CLOCKWISE INTO THE HOLE FOR... - Page 28 CRANK ARM 3. USE THE 15MM WRENCH TO FINISH INSERTING PEDAL (L) AND THEN TIGHTENING THE SPINDLE INTO THE CRANK ARM. 4. CHECK THAT THE RIGHT PEDAL IS SECURE. 5. REPEAT STEPS 2 - 4 WITH THE LEFT ("L") PEDAL. SPINDLE IMPORTANT: THE SPINDLE ON THIS PEDAL IS REVERSE THREADED AND NEEDS TO BE INSERTED...
-
Page 29: Attaching The Handlebar
Attaching the Handlebar* *ALREADY COMPLETED FOR SOME MODELS 1. LIFT THE LATCH ON THE HANDLEBAR CLAMP UP INTO THE OPEN POSITION. LATCH HANDLEBAR CLAMP... - Page 30 2. USING YOUR FINGERS, UNSCREW THE KNOB ON THE UNDERSIDE OF THE HANDLEBAR CLAMP BY TURNING IT COUNTERCLOCKWISE. 3. REMOVE THE KNOB AND FLAT WASHER. SET ASIDE. 4. PULL THE CLAMP LATCH UP, AND PULL THE STEM WITH CURVED WASHER UP AND COMPLETELY OUT OF THE CLAMP, ALONG WITH THE CURVED WASHER THAT IS ON THE STEM.
- Page 31 7. POSITION THE HANDLEBAR IN THE BASE OF THE CLAMP SUCH THAT THE THROTTLE IS ON THE RIGHT SIDE. 8. CENTER THE HANDLEBAR IN THE BASE 9. SLIDE THE TOP PART OF THE CLAMP BACK IN FROM ONE SIDE UNTIL THE TWO CLAMP HOLES ARE ALIGNED. HANDLEBAR THROTTLE CLAMP TOP...
- Page 32 10. RE-INSERT THE STEM OF THE CLAMP LATCH WITH CURVED WASHER THROUGH THE CLAMP TOP. LATCH CURVED WASHER STEM CLAMP TOP CLAMP BASE...
- Page 33 11. SLIDE THE FLAT WASHER ONTO THE EXPOSED END OF THE STEM AND THEN TWIST THE KNOB ON CLOCKWISE. LATCH CURVED WASHER STEM CLAMP TOP CLAMP BASE FLAT WASHER KNOB...
- Page 34 12. CLOSE THE LATCH AND TIGHTEN THE NUT TO SECURE THE HANDLEBAR IN PLACE. 13. CHECK THAT THE HANDLEBAR IS SECURE. * IMPORTANT: DO NOT OVER-TIGHTEN OR UNDER-TIGHTEN THE BOLT. OVER-TIGHTENING COULD INHIBIT CLOSURE OF THE CLAMP. UNDER-TIGHTENING COULD RESULT IN A LOOSE CLAMP AND AN UNSTABLE HANDLEBAR. LATCH KNOB...
-
Page 35: Turning The Battery On & Off
(REFER TO PAGE 43.) FLIP THE SWITCH TO TURN THE BATTERY POWER ON OR OFF. BATTERY POWER SWITCH CAUTION: TURN OFF THE BATTERY POWER WHEN NOT USING THE HAZE FOR PROLONGED PERIODS (30+ DAYS). FAILURE TO DO SO MAY RESULT IN BATTERY MALFUNCTION. -
Page 36: Removing & Replacing The Battery
Removing & Replacing the Battery REMOVING THE BATTERY 1. TURN THE BATTERY POWER OFF. (SEE PAGE 34). 2. OPEN THE FRAME FOLDING LATCH AND PIVOT THE FRAME OPEN TO EXPOSE THE BATTERY COMPARTMENT. BATTERY POWER FRAME FOLDING LATCH SWITCH BATTERY COMPARTMENT... - Page 37 3. PULL THE BATTERY HANDLE UP. 4. INSERT THE KEY INTO THE BATTERY KEYHOLE AND TURN IT CLOCKWISE TO UNLOCK THE BATTERY FROM THE FRAME. NOTE: THE SAME KEY UNLOCKS BOTH THE BATTERY AND THE WHEEL LOCK. BATTERY HANDLE BATTERY KEYHOLE...
- Page 38 BATTERY 5. USE THE HANDLE TO PULL THE BATTERY OUT OF THE BATTERY COMPARTMENT. 6. REMOVE THE KEY FROM THE KEYHOLE. REPLACING THE BATTERY 1. ENSURE THAT THE COVER ON THE CHARGING PORT IS CLOSED. 2. SLOWLY PUSH THE BATTERY INTO THE BATTERY COMPARTMENT, ENSURING THAT THE BACK OF THE BATTERY LINES UP WITH THE PLUGS AT THE BACK OF THE BATTERY COMPARTMENT.
-
Page 39: Charging The Battery
CHARGING PORT WITH COVER Charging the Battery THE BATTERY CAN BE CHARGED WHILE INSTALLED IN THE BIKE OR WHEN REMOVED FROM THE BIKE. IT CAN TAKE UP TO 5 HOURS TO BRING A DEPLETED BATTERY TO FULL CHARGE. CHARGING AN INSTALLED BATTERY: 1. - Page 40 CHARGING PORT WITH COVER CHARGING INDICATOR LIGHT CHARGING INDICATOR LIGHT ON THE CHARGER: - CHARGING - CHARGING COMPLETE CHARGING AN UNINSTALLED BATTERY: 1. CONNECT THE CHARGING CABLE WITH THE CHARGER. 2. PULL OPEN THE CHARGING PORT COVER ON THE BATTERY. 3.
-
Page 41: Using The Rear Wheel Lock
Using the Rear Wheel Lock 1.10 AS A SECURITY FEATURE, THE HAZE HAS A LOCKABLE REAR WHEEL. WHEN LOCKED, THE WHEEL WILL NOT SPIN AND THE BIKE CANNOT BE USED. TO LOCK: 1. PULL OPEN THE COVER ON THE REAR WHEEL LOCK. -
Page 42: Tire Pressure & Inflation
Tire Pressure & Inflation 1.11 BEFORE YOUR FIRST RIDE, YOU WILL NEED TO ADD AIR TO YOUR TIRES TO BRING THEM TO WITHIN THE RECOMMENDED PRESSURE OF 35 – 45 PSI (POUNDS PER SQUARE INCH). USE A GAUGE TO CHECK THAT YOUR TIRE PRESSURE FALLS WITHIN THIS RANGE PRIOR TO EVERY RIDE. - Page 43 LOCKING LATCH NOZZLE GAUGE HANDLE TIRE PUMP TIRE VALVE WITH DUST CAP...
-
Page 44: Functions & Features
2. Functions & Features REAR BRAKE HANDBRAKE BELL (SECTION 3.6) (SECTION 2.4) FRONT BRAKE HANDBRAKE TWIST THROTTLE (SECTIONS 3.3) BATTERY INDICATOR LIGHTS (SECTION 2.2) CRUISE CONTROL & PEDAL ASSIST HEADLIGHT BUTTON MODE (SECTIONS 2.3 AND 3.4) (SECTION 3.2) POWER BUTTON (SECTION 2.1) Powering On &... -
Page 45: Checking Battery Charge Level
51 -75% 26 - 50% CHARGE PERCENTAGE (CHARGE YOUR HAZE NOW!) Using the Lights THE HEADLIGHT IF RIDING IN LOW LIGHT CONDITIONS, TURN ON THE HEADLIGHT SO YOU CAN BETTER SEE THE ROAD AHEAD AND ONCOMING RIDERS CAN BETTER SEE YOU. THE HEADLIGHT WILL ONLY POWER ON WHEN THE MOTOR IS ALSO TURNED ON. -
Page 46: Using The Kickstand
KICKSTAND Using the Kickstand TO USE THE KICKSTAND, PIVOT IT DOWN AND GENTLY TILT YOUR BIKE ONTO IT TO STAND. TO RAISE THE KICKSTAND, PIVOT IT BACK UP. IMPORTANT: ALWAYS RAISE THE KICKSTAND BEFORE RIDING. -
Page 47: Tucking Away The Pedals
PULL Tucking Away the Pedals FOR STORAGE IN COMPACT SPACES, TUCK THE PEDALS UP AND OUT OF THE WAY. TO FOLD THEM AGAINST THE FRAME: 1. PLACE YOUR FINGERS AROUND THE MIDDLE BAR INSIDE THE PEDAL. 2. WHILE PULLING THE BAR TOWARDS THE TIP OF THE PEDAL, PIVOT THE PEDAL UP OR DOWN UNTIL IT SNAPS INTO POSITION CLOSE TO THE FRAME. - Page 48 PULL TO UNFOLD THEM FOR RIDING: 1. PLACE YOUR FINGERS AROUND THE MIDDLE BAR INSIDE THE PEDAL. 2. WHILE PULLING THE BAR TOWARDS THE TIP OF THE PEDAL, PIVOT THE PEDAL DOWN UNTIL IT SNAPS INTO PLACE.
-
Page 49: Making Moves
3. Making Moves Riding the Haze JET OFF ON YOUR HAZE IN 4 DIFFERENT WAYS: 1. WITH ASSISTED PEDALING (SECTION 3.2) 2. USING THE THROTTLE FOR ALL-MOTOR POWER (SECTION 3.3) 3. LOCKED INTO CRUISE CONTROL (SECTION 3.4) 4. USING ONLY PEDAL POWER (SECTION 3.5) -
Page 50: Using Pedal Assist
TO RIDE YOUR HAZE WITHOUT ANY PEDAL ASSISTANCE, JUST RIDE WITH THE MOTOR OFF. NOTE: YOU CAN RIDE YOUR HAZE WITH THE POWER TURNED OFF OR IF THE BATTERY HAS DEPLETED, BUT YOU WILL NOT BE ABLE TO USE THE HEADLIGHT. -
Page 51: Using The Throttle
Using the Throttle TO RIDE THE HAZE LIKE A MOTOR BIKE, STOP PEDALING AND KEEP YOUR FEET RESTING ON THE PEDALS. TO ACCELERATE, SLOWLY ROTATE THE TWIST THROTTLE TOWARDS YOU WITH YOUR RIGHT HAND. TWIST THROTTLE THE MORE YOU ROTATE THE THROTTLE, THE MORE THE MOTOR WILL ENGAGE—AND THE FASTER YOU WILL TRAVEL. -
Page 52: Activating Cruise Control
Activating Cruise Control CRUISE CONTROL LOCKS THE BIKE IN MOTION AT A CERTAIN PACE. ONCE YOU SET CRUISE CONTROL, THE MOTOR WILL DO THE WORK TO KEEP THE PACE—NO THROTTLE OR PEDALING REQUIRED. TO ACTIVATE CRUISE CONTROL: 1. STOP PEDALING, AND USE THE THROTTLE TO REACH AND MAINTAIN YOUR DESIRED SPEED. 2. -
Page 53: Traditional Biking
Traditional Biking YOU CAN RIDE YOUR HAZE LIKE A TRADITIONAL BIKE—USING ONLY PEDAL POWER. JUST RIDE AS YOU WOULD A TRADITIONAL BIKE, WITHOUT POWERING THE MOTOR ON. NOTE: WITHOUT THE BIKE POWERED ON, YOU CANNOT MAKE USE OF THE HEADLIGHT. THE BRAKE LIGHT WILL ALSO NOT... -
Page 54: Using The Brakes
Using the Brakes SQUEEZE ONE OR BOTH HANDBRAKES GENTLY TO SLOW DOWN; SQUEEZE WITH MORE FORCE TO COME TO A COMPLETE STOP. TO AVOID ABRUPT MOVEMENTS, TRY TO SQUEEZE THE HANDBRAKES GRADUALLY. • LEFT HANDBRAKE FRONT WHEEL BRAKE • RIGHT HANDBRAKE REAR WHEEL BRAKE FRONT BRAKE HANDBRAKE REAR... -
Page 55: Maximizing Riding Range & Speed
BATTERY FASTER THAN USING PEDAL ASSIST. · AIR TEMPERATURE – THE IDEAL TEMPERATURE FOR RIDING AND STORING THE HAZE IS BETWEEN 50 - 90°F (10 - 35°C). · INCLINE – THE MOTOR HAS TO WORK HARDER ON UPHILLS THAN ON FLAT STRETCHES OR DOWNHILLS, DRAINING THE BATTERY FASTER. -
Page 56: Helmet Safety
Helmet Safety A HELMET SHOULD BE WORN BY THE RIDER AT ALL TIMES. PROPER POSITIONING: IMPROPER POSITIONING: THE FOREHEAD IS COVERED THE FOREHEAD IS EXPOSED. BY THE HELMET. A FALL COULD RESULT IN SERIOUS INJURY. * WEAR A HELMET, APPROPRIATE CLOTHING, SHOES, AND SAFETY GEAR. AVOID CLOTHING THAT CAN GET CAUGHT INTO OR UNDER THE WHEELS. -
Page 57: Care & Maintenance
SECURING YOUR HAZE The Haze is equipped with a rear wheel lock that is compatible with the same key as the battery that came with the bike. • To lock, open lock cap, using the key push lock through rear wheel disc, then close lock cap. - Page 58 • Bring the Haze into a warm (above 50°F/10°C) environment for charging. • Charging port cover should remain closed when storing. • Turn off battery switch when not using the Haze for prolonged periods (30+ days). Failure to do so may result in a malfunctioning battery.
- Page 59 Stay connected. Be sure to follow @ridejetson on social media to learn about fantastic offers, giveaways, and all the latest Jetson news. Loving your ride? Then be sure to leave a review at ridejetson.com/reviews. We can’t wait to hear from you!
- Page 62 Date Code: 05/2023 Document Edition: v2.0 © 2023, JETSON. ALL RIGHTS RESERVED. Manufactured by JETSON ELECTRIC BIKES LLC. No portion of this document, including shape, copy, graphics, and design, may be reproduced or transmitted in any form or by any means.
Need help?
Do you have a question about the Haze and is the answer not in the manual?
Questions and answers
Does the Haze have a fuse to engage the battery for charging
Need replacement key for Jeston Haze code 002. How do I order one.
Mi bicicleta no enciende la luz delantera solo titila
The front light of the Jetson Haze bicycle will only power on when the motor is also turned on. If the light flickers but does not stay on, it could indicate an issue with the motor not engaging properly. Additionally, if the brakes are too tight, they might prevent the bike from operating correctly, which could also affect the light function. Checking the brake tightness and ensuring the motor is turning on properly may help resolve the issue.
This answer is automatically generated