Midea Cube MAD User Manual page 5

Table of Contents

Advertisement

Available languages

Available languages

CAUTION
• Do not use in places where water may splash onto the unit.
Water may enter the unit and degrade the insulation. It may cause an electric
shock or fire.
• Place the unit on a level, sturdy section of the floor.
If the unit falls over, it may cause water to spill and damage belongings, or cause
electrical shock or fire.
• Never insert your finger or other foreign objects into grills or openings. Take
special care to warn children of these dangers.
It may cause failure or electric shock.
• Do not climb up on or sit on the unit.
You may be injured if you fall or if the unit falls over.
• Always insert the filters securely, and take caution to avoid injuries to hand and
fingers. Clean filter once every two weeks.
• If water enters the unit, turn the unit off and disconnect the power, contact the
Service Center at 1-866-646-4332.
• If the unit is knocked over during use, turn off the unit and unplug it from the
main power supply immediately. Visually inspect the unit to ensure there is no
damage. If you suspect the unit has been damaged, contact customer service.
• In a thunderstorm, the power should be disconnected to the unit due to lightning.
• Do not run power cord under carpeting. Do not cover cord with throw rugs,
runners, or similar coverings. Do not route cord under furniture or appliances.
Arrange cord away from traffic area and where it will not be tripped over.
• Do not place anything on top of the unit.
This would restrict airflow, possibly damage the unit and decrease performance.
• Always lift unit with 2 hands using proper lifting technique.
• Before turning the unit on, make sure it is seated correctly on the bucket.
• Before lifting ensure the handle is properly attached.
• Only use the bucket that came with the unit. Do not use any other bucket.
• Clean the bucket regularly.
 Page 5 

Hide quick links:

Advertisement

Chapters

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Cube MAD and is the answer not in the manual?

Questions and answers

Ken Detwiler
March 21, 2025

Model MAD35S1QWT Dehumidifier- Unit does not start. When plugged it initially all indicator lights light up for a several seconds then go out. Nothing happens after that. Bucket is empty.

2 comments:
Mr. Anderson
March 21, 2025

The Midea MAD35S1QWT dehumidifier may not start after all indicator lights turn off due to the 3-minute compressor operation delay protection. After the unit stops, it cannot restart for the first 3 minutes to protect the compressor. The unit will restart automatically after this delay.

This answer is automatically generated

Ken Detwiler
March 24, 2025

@Mr. Anderson

Ken Detwiler
March 24, 2025

The dehumidifier has been off for days... When I try to start it all lights come on briefly, then go out. Machine does not start

1 comments:
Mr. Anderson
March 24, 2025

If the Midea Cube MAD dehumidifier won't start and all lights turn on briefly before going out, possible issues include:

1. The plug is not firmly connected to the wall outlet.
2. A house fuse has blown, or the circuit breaker has tripped.
3. The dehumidifier has reached its preset humidity level or the water bucket is full.
4. The water bucket is not in the proper position.
5. The 3-minute compressor delay protection is active, preventing immediate restart.

Check these factors and correct them as needed.

This answer is automatically generated

david w gross
April 21, 2025

what is the code "AP"

david w gross
April 21, 2025

what is the AP code and how do I turn it off

Table of Contents

Save PDF