Output; Output:ecltrgn[:State]; Output[:External][:State] - HP VXI E1476A User's Manual And Programming Manual

Subsystem Syntax
OUTPut:ECLTrg n [:STATe]
Parameters
Comments

OUTPut:ECLTrgn[:STATe]?

OUTPut[:EXTernal][:STATe]

Chapter 3
The command subsystem enables one trigger line of the HP E1405A/B or

OUTPut

E1406A Command Module. It also can disable the active line.
OUTPut
:ECLTrg n (:ECLTrg0 or :ECLTrg1
[:STATe] <mode>
[:STATe]?
[:EXTernal
[:STATe] <mode>
[:STATe]?
:TTLTrg n (:TTLTrg0 through :TTLTrg7
[:STATe] <mode>
[:STATe]?
OUTPut:ECLTrg n [:STATe] <mode>
ECL trigger bus pulse on the VXI bus line specified by n. There are two ECL trigger
lines on the VXI bus allowing valid values for n to be 0 and 1. "mode" enables (
or 1) or disables ( OFF or 0) the specified ECL Trigger bus line.
Parameter Parameter
Name Type
n
numeric
<mode>
boolean
•
When OUTPut:ECLTrg n :STATe ON
channel is closed during a scan.
OUTPut:ECLTrg n [:STATe]?
by n. A "1" is returned if the line is enabled; a "0" is returned if it is disabled. Valid
values for n are 0 and 1.
OUTPut[:EXTernal][:STATe] <mode>
the HP E1406A command module.
•
OUTPut[:EXTernal][:STATe] ON|1
•
OUTPut[:EXTernal][:STATe] OFF|0
enables ( ON or 1) or disables (
Range of Values
0 or 1
0 | 1 | OFF | ON
is set, a trigger pulse occurs each time a
queries the state of the ECL trigger bus line specified
enables or disables the "Trig Out" port on
enables the port
disables the port.
HP E1476A Switchbox Command Reference
OUTPut
OFF or 0) the
ON
Default
Value
N/A
OFF | 0
71