Table of Contents
Advertisement
3
Parts names and functions
3.1
Detector
The detector is designed to capture radiographic images.
L
A
POWER switch
B
Speaker
C
Power LED
D
READY switch
E
READY LED
F
Error code display
G
IR data port
24
I
K
When the detector is off, press the POWER switch
(for at least 0.5 seconds) to turn on the detector.
When the detector is on, press and hold the
POWER switch (for at least 3 seconds) to turn off the
detector, or press and hold the POWER switch (for
1 second or less) to establish the communication
link.
Lights up when the detector turns on. Shows the
remaining battery pack charge.
This LED lamp flashes while the detector is
transitioning to exposure ready status, and lights
up when the detector enters exposure ready
status. Also flashes (approx. 3 seconds) when
detector linkage is initiated. Flashes in the case of
errors.
If errors occur, an error code is displayed.
Communication port for the detector link
(registration/connection)
A
B
C
D
E
F
G
H
J
Advertisement
Table of Contents
