Using The Noise Controls Mode - Samsung SM-R510 User Manual

Using the earbuds
• Volume down / Volume up: Adjust the volume.
• If you select the volume adjustment feature as one side's touch-and-hold feature,
the other side's touch-and-hold feature is also automatically set to the volume
adjustment feature.
• When the volume adjustment feature has been already selected and you try to
change the one side's touch-and-hold feature, the other side's touch-and-hold
feature is automatically set to activate the noise controls mode.

Using the noise controls mode

Introduction
There are two noise controls mode: active noise cancelling and ambient sound mode.
Activate the active noise cancelling feature to reduce the volume of sounds around you. Use
it when you want to avoid distractions, such as when listening to music. Conversely, activate
the ambient sound mode to hear your surroundings clearly, so you can quickly detect any
potentially dangerous situations or hear another person's voice during a conversation.
If the microphone (the outer microphone while wearing the earbuds) and its area are
covered completely, feedback may occur when activating the noise controls mode.
You can only activate the noise controls mode when wearing both earbuds in your ears.
Activating the noise controls mode
Activating from the earbuds
Make sure that the touch-and-hold feature is set to the noise controls mode and then touch
and hold the earbud.
The following features will be launched in order whenever you touch and hold the earbud:
active noise cancelling and ambient sound mode.
26