Miele Profitronic M PW 6131 Programming Instructions Manual page 18

Programming
Minimum water level:
By selecting the minimum water option all
blocks without heating will be run using the
minimum level. This value specifies the
lowest level selectable.
The max. value is 350 mm.
Create ~ Programme header
Minimum water level: 100 mm
Fill type: Auto load adjustment
- e
Selection choice: - 0 mm, 2 mm to 350 mm
Fill type
This option is used to specify how water is
taken into the machine.
If when creating a programme the fill type is
changed in the programme header, the
basic settings for the level will be saved to
the blocks again.
Create ~ Programme header
Fill type: Auto load adjustment
Access control: Yes
- e
Selection choice:
– Auto load adjustment mm
In programmes which use auto load
adjustment the amount of laundry in the
drum influences the water level, the amount
of detergent required and the number of
rinses.
– Water level mm
When selecting - Water level mm or - Auto
load adjustment the option of selecting
"Concentration ml/l" is blocked in the
dispensing menu and in the dispensing type
menu in block programming.
– Water volume l
– Laundry to suds ratio kg/l
18
Access control
When access control is selected the
programme is available for use. Only
progammes that have been given "Access
control" can be started.
Create ~ Programme header
Access control: Yes
-
Lock: No
e
S A
Selection choice: - No - Yes
Lock
When the lock option is selected the
programme is barred from use. A
programme once started can only be
stopped or cancelled by pressing the
Stop/End button within the first minute of
starting it. The door cannot be opened until
the programme has finished.
Create ~ Programme header
Lock: Yes
-
Peak load: Yes
e
S A
Selection choice: - No - Yes
- e
- e
M.-Nr. 06 533 430
-
e
S A
-
e
S A