Panasonic DMC-FX35 Operating Instructions Manual page 121

∫ Disconnecting the USB connection cable safely
•
Proceed with the hardware removal using "Safely Remove Hardware" on the task tray of the
PC. If the icon is not displayed, check that [ACCESS] is not displayed on the LCD monitor of the
digital camera before removing the hardware.
Note
•
Do not use any other USB connection cables except the supplied one.
•
Turn the camera off before connecting or disconnecting the AC adaptor (optional).
•
Before inserting or removing a card, turn the camera off and disconnect the USB connection
cable. Otherwise, data may be destroyed.
•
With the Mac OS X v10.2 or an earlier operating system, set the Write-Protect switch of the SDHC
memory card to the [LOCK] position when importing pictures from an SDHC memory card.
• If the camera is connected in clipboard mode, the built-in memory data is displayed even if a
card is inserted.
∫ Viewing the contents of the built-in memory or card using the PC (folder
composition)
≥Built-in memory
≥
Card
DCIM
100_PANA
P1000001.JPG
P1000002.JPG
P1000999.JPG
101_PANA
999_PANA
MISC
PRIVATE 1
MEMO0001.JPG
MEMO0002.JPG
A new folder is created when pictures are taken in the following situations.
•
After [NO.RESET]
•
When a card containing a folder with the same folder number has been inserted (Such as when
pictures were taken using another make of camera)
•
When there is a picture with file number 999 inside the folder
∫ Connection in the PTP mode (Windows
Set [USB MODE] to [PictBridge(PTP)].
Data can now be read only from the card into the PC.
•
When there are 1000 or more pictures on a card, the pictures may not be imported in the PTP
mode.
Connecting to other equipment
1
2
100_PANA
3
MISC:
PRIVATE1:
(Built in memory only)
(P30) in the [SETUP] menu has been executed
Folder number
File number
JPG:
MOV:
R
XP, Windows Vista
- 121 -
Pictures
Motion pictures
DPOF print
Favourite
Clipboard pictures
R
and Mac OS X only)