Table of Contents
Advertisement
•
Ensure the Bluetooth function is activated
on your Bluetooth device.
•
Re-pair the unit with your Bluetooth device.
Wi-Fi
Wi-Fi Connection cannot be established.
•
Check the availability of WLAN network on
the router.
•
Place the Wi-Fi router closer to the unit.
•
Make sure the password is correct.
•
Check the WLAN function or reboot the
modem and Wi-Fi router.
Dolby Atmos
Cannot achieve outstanding Dolby Atmos
e ects.
•
For non-HDMI connections (such as use
of USB, Bluetooth, OPTICAL or AUDIO
IN), limited height surround e ects are
generated. See the section of 'Dolby Atmos'
about how to achieve best Dolby Atmos
e ects.
Play-Fi
Cannot discover the Play-Fi supported devices
from the app.
•
Make sure the device is connected to the
Wi-Fi.
Cannot play Play-Fi music.
•
Certain network service or contents
available through the device may not be
accessible in case the service provider
terminates its service.
•
When the first time set up is not successful,
close the Philips Sound app powered by
DTS Play-Fi. Restart the app.
•
When the speaker was set as Stereo Pairs
or Surround Sound, the speaker need to
be disconnected in the App before use
separately.
Remote control does not work
•
Before you press any playback control
button, first select the correct source.
•
Reduce the distance between the remote
control and the unit.
•
Insert the battery with its polarities (+/-)
aligned as indicated.
•
Replace the battery.
•
Aim the remote control directly at the
sensor on the front of the unit.
This is a 15 mins power o
function, one of the ERPII standard
requirement for saving power
•
When the unit' s external input signal
level is too low, the unit will be turned o
automatically in 15 minutes. Please increase
the volume level of your external device.
The subwoofer is idle or the indicator
of subwoofer do not light up
•
Please unplug power cord from the mains
sockect, and plug it in again after 3 minutes
to reset the subwoofer.
23
Advertisement
Table of Contents
