Beko RG10A/BGEF User Manual page 13

4 Buttons and functions
1. Mode
Scrolls through operation modes as follows:
AUTO  COOL  DRY  HEAT  FAN
C
Note: HEAT mode is not
supported by the cooling only
appliance.
2. ECO/GEAR
Press this button to enter the energy efficient
mode in a sequence of following:
ECO  GEAR (75%)  GEAR (50%) 
Previous setting mode  ECO ....
3. OK
Used to confirm the selected functions
4. Timer
Set timer to turn unit on or off.
5. HygieneMax
Used to starts and stops the HygieneMax
feature.
6. GoClean
Used to start/stop the GoClean function.
(Some units, please refer to the User' s
operation & Installation manual).
7. LED
Turns indoor unit's LED display and air
conditioner buzzer on and off, which create
a comfortable and quiet environment.
8. Turbo
Enables unit to reach preset temperature in
shortest possible time
9. Swing
Starts and stops the horizontal louver
movement. Hold down for 2 seconds to
initiate vertical louver auto swing feature.
Remote control / User Manual
10. FAN SPEED
Selects fan speeds in the following order:
AU  20%  40%  60% 80% 100%.
Press the TEMP
decrease the fan speed in 1% increments.
11. TEMP
Decreases temperature in 1°C (1°F)
increments. Min. temperature is 16°C (60°F).
12. SET
Scrolls through operation functions as follows:
Breeze Away ( ) Sleep  ( ) 
ZoneFollow ( )  AP mode (
Breeze Away ...
The selected symbol will flash on the display
area, press the OK button to confirm.
13. TEMP
Increases temperate in 1°C (1°F) increments.
Max. temperature is 30°C (86°F).
Note: Press together
C
buttons at the same time for
3 seconds will alternate the
temperature display between
the °C & °F.
14. On/Off
Turns the unit on or off.
or button to increase/
) (Some units) 
&
13 / 80 EN