Philips ReCare 7.5 S User Manual page 27

Programming preset programs
• Select the desired program button then press the enter key.
• The message window will prompt you to enter the age, weight, time
and max level for the program. You may enter the age using the up
and down keys or the numeric key pad then press the enter key to
accept and proceed to the next screen.
• Max level refers to the top resistance level setting for the program.
• Now you are nished editing the settings and can begin the
program by pressing the start key. You can also go back and modify
your settings by pressing the enter key. Note: at any time during the
editing of data you can press the stop key to go back one level, or
screen.
• During the manual program you will be able to scroll through the data
in the message window by pressing the enter key.
• When the program ends you may press start to begin the same
program again or stop to exit the program, or you can save the
program you just completed as a custom program by pressing the user
keys and following the instructions in the message window.
User programs
• The user 1 & 2 programs allow you to build and save a custom
program. You can build your own custom program by following the
instructions below or you can save any other preset program you
complete as a custom program. The user program allows you to
further personalize it by adding your facility name.
Designing and saving a new program
• Press either user key. The message window will show a welcome
message; if you had previously saved a program the message will
contain the name you gave it. Then press the enter key to begin
programming.
27