Removing, Attaching And Cleaning Air Inlet Grille; Maintenance Beginning And Ending Of Use - Hitachi RPC-5.0FSR Operation Manual

13.1.2 Removing, Attaching and Cleaning
Air Inlet Grille
Wipe the air inlet grille by a soft cloth which is
soaked in lukewarm water and squeezed.
Use a soft cloth to clean the air inlet grille, the air
outlet and the service cover. If benzine, thinner
or detergent (with surfactant) is used to clean, the
resin part may be changed color or deformed. In
addition, pay attention that the parts around the air
outlet (louver, guide, etc.) may be damaged if an
excessive force is applied.
The air inlet grille can be removed and cleaned.
(1) Open the air inlet grille.
Press and slide the cover of the air inlet grille
in the direction of the arrow with fingers in
the holes on the cover.
Air Inlet Grille
(2) Remove the air inlet grille.
• Remove the supporting string from the side
plate.
18
(3) Clean the air inlet grille.
(4) Attach the air inlet grille.
13.2 Maintenance Beginning and Ending
< Beginning of Use >
Holes
(2 or 3 Portions)
< Ending of Use >
Side Plate
Supporting
String
• While the air inlet grille is being opened,
depress the knobs of hinge (
air inlet grille toward arrow direction (
remove the air inlet grille.
Hinge
Push
2
Depress
1
* Attach the air inlet grille in the reverse
procedure for removing.
* The supporting string is attached to the
side plate.
of Use
• Remove obstacles for the air inlet grilles of
indoor unit and outdoor unit and the air outlet.
• Check that the air filter is not clogged.
• Clean the air filter and the air inlet grille.
), push the
1
) and
2
Depress the knob of
hinge and push the air
inlet grille forward.
A10762290A