Equipment And Personnel Safety - GE LOGIQ 7 Pro Quick Manual

Table of Contents

Advertisement

LOGIQ 7/LOGIQ 7 Pro Quick Guide

Equipment and Personnel Safety

Related Hazards
This equipment contains dangerous voltages that are capable of serious injury or death.
WARNING
If any defects are observed or malfunctions occur, stop operating the equipment and perform the proper action for the patient. Inform a
qualified service person and contact a Service Representative for information.
There are no user serviceable components inside the console. Refer all servicing to qualified service personnel only.
Only approved and recommended peripherals and accessories should be used. All peripherals and accessories must be securely
WARNING
mounted to the LOGIQ 7/LOGIQ 7 Pro.
The concerns listed below can seriously affect the safety of equipment and personnel during a diagnostic ultrasound examination.
DANGER
Explosion
Risk of explosion if used in the presence of flammable anesthetics.
Hazard
This equipment provides no special means of protection from high frequency (HF) burns that may result from using an electrosurgical unit
CAUTION
(ESU). To reduce the risk of HF burns, avoid contact between the patient and ultrasound transducer while operating the ESU. Where
contact cannot be avoided, as in the case of TEE monitoring during surgery, make sure the transducer is not located between the ESU
active and dispersive electrodes and keep the ESU cables away from the transducer cable.
To avoid injury:
Electrical
Hazard
Do not remove protective covers. No user serviceable parts are inside. Refer servicing to qualified service personnel.
To assure adequate grounding, connect the attachment plug to a reliable (hospital grade) grounding outlet.
Never use any adaptor or converter of a three-prong-to-two-prong type to connect with a mains power plug. The protective earth
connection will loosen.
Do not place liquids on or above the console. Spilled liquid may contact live parts and increase the risk of shock.
Plug any peripherals into the LOGIQ 7/LOGIQ 7 Pro AC power outlet.
Direction 5307393-100 Rev. 1
38

Advertisement

Table of Contents
loading

This manual is also suitable for:

Logiq 7

Table of Contents