VEMAG HP25E Operating Instructions Manual page 120

6. Graphical control
Number Message
20006 Safety cover open (casing
pusher)
20007 Safety cover open
20008 Fallen below voltage of
internal drives (48 V)
20009 Safety cover open (belts)
20010 Filler communication error
20011 Fallen below the casing
applier drive voltage
20013 Check casing magazine
sensor
20014 Check dividing belts
sensor
20015 Communication error for
drives
20016 Blade box opened
20017 Upper belt guide missing
20018 Lower belt guide missing
20019 Safety cover open
20100 Linking drive not ready
20101 Belt drive 1 not ready
20102 Belt drive 2 not ready
20103 Blade drive not ready
20104 Adjustable drive for belt 1
not ready
20105 Adjustable drive for belt 2
not ready
20106 Linking head drive not
ready
20107 Casing pusher drive not
ready
20108 Magazine feed drive not
ready
20109 Gripper swivel drive not
ready
20110 Casing applier drive not
ready
Portion length (filling
20200
speed too high)
1st portion length (filling
20201
speed too high)
6-74
Cause
Casing pusher safety cover is
open
Casing magazine safety cover is
open
Power supply for casing magazine
drives has dropped
Dividing belts safety cover is open
Error on the internal CAN bus
Casing applier drive power supply
has dropped
The sensor that checks if the
magazine box is folded down does
not switch.
Sensor does not switch or there
are no belts assembled
Error on the internal CAN bus
Blade box FSL 210 is open
Safety cover open
-
-
-
-
-
-
-
-
-
-
-
-
-
HP25E / HP30E
Remedy
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
© VEMAG 2018