3.3 Starting KX-TVM Maintenance Console
The instructions listed below explain how to start KX-TVM Maintenance Console. These instructions are for
when connecting to the VPS via USB.
Note
•
The screenshots shown here are for reference only, and may differ from the screens displayed on your
PC.
•
KX-TVM Maintenance Console uses English as the default language. See step 4 to change the
language.
1.
Click the KX-TVM Maintenance Console shortcut icon.
2.
Select the appropriate VPS model and click OK.
3.
The Set Default Parameters window is displayed the first time you start KX-TVM Maintenance Console.
Select the TVM Type, PBX Type, and Integration Mode. Change the default parameters listed in the window
if necessary, then click OK.
Note
•
If you have already used KX-TVM Maintenance Console to change the Programmer Code, the
Enter Programmer Code dialogue box is displayed. Enter the previously set Programmer Code,
then click OK.
Document Version 2.1 2008/04
3.3 Starting KX-TVM Maintenance Console
Installation Manual
87