Shot of steam
A powerful shot of steam helps to remove very stubborn creases.
The shot-of-steam function only works at temperature settings
between 2 and MAX.
C
1
Press and release the shot-of-steam button.
Vertical shot of steam (GC2650/2640/2620/2560/2530/2520)
C
1
The shot-of-steam function can also be used when you are
holding the iron in vertical position.This is useful for removing
creases from hanging clothes, curtains, etc.
Never direct the steam at people.
Drip stop (GC2650/GC2560 only)
This iron is equipped with a drip stop function: the iron automatically
stops producing steam when the temperature is too low to prevent
water from dripping out of the soleplate.When this happens you will
hear a click.
Automatic shut-off (GC2560 only)
The electronic shut-off function automatically switches the heating
element off if the iron has not been moved for a while.
C
◗ The automatic shut-off light starts blinking to indicate that the
heating element has been switched off.
To let the iron heat up again, pick the iron up or move it slightly.The
automatic shut-off light goes out.
1
If the temperature light goes on, wait for it to go out before
you start ironing.
2
If the temperature light does not go on, the iron is ready for
use.
ENGLISH
9