Storage; After The Calc-Clean Process - Philips GC2510 User Manual

C
9 Use vinegar to remove scale, if any, from the steam control
needle.
Do not bend or damage the steam control needle.
C
10 Put the steam control back into the iron by inserting the point
of the needle exactly in the centre of the hole and by fitting
the small projection on the side of the needle into the slot.
Press down the steam control while turning it to position O.
11 Repeat the Calc-Clean process if the iron still contains a lot of
impurities.

After the Calc-Clean process

1 Put the plug in the wall socket and let the iron heat up to allow
the soleplate to dry.
2 Unplug the iron when the temperature light has gone out.
3 Move the iron gently over a piece of used cloth to remove any
water stains that may have formed on the soleplate.

Storage

1 Set the steam control to position O, remove the plug from the
wall socket and let the iron cool down.
2 Clean the appliance and wipe scale and any other deposits off
the soleplate with a damp cloth and a non-abrasive (liquid)
cleaner.
Keep the soleplate smooth: avoid hard contact with metal objects.
Never use a scouring pad, vinegar or other chemicals.
C
3 Regurarly rinse the water tank with water and empty it after
cleaning.
ENGLISH
11