Toshiba RAS-25G3FVG-ND Owner's Manual page 7

WEEKLY TIMER OPERATION
23
How to set WEEKLY TIMER
1. Press
2. Press
The sequence of day symbol appears on the LCD.
SU  MO  TU  WE  TH  FR  SA
3. Press
• The program 1 is ready for setting while
pressed PG-1 appears on the LCD.
• Press
the sequence program 1 to program 4.
4. Press
• The time can be set between 0:00 and 23:50 in
10 minute intervals.
• Press and hold the button to change setting time
for 1 hr.
• Only one of ON or OFF timer can be set on each
program.
ON timer display
*OFF timer is used to stop the air conditioner only.
The display does not show Operation mode,
Temperature, Fan speed and others.
5. Press
6. Press
• The temperature can be set between 17°C and 30°C.
7. Press
8. Add operations, if required.
• Press
(Notes: Fireplace cannot select and memorize in
weekly function)
• Press
• Press
• Press
• Press
9. Adding or editing the program.
The program can be set to perform on all the required
days until
If adding or editing a program is required, please
repeat steps 2 - 8 before setting confirmation.
10. After adding or editing, press
the setting*.
Weekly timer running
Next program
Timer ON or OFF
to enter WEEKLY TIMER setting.
Blink
to select desired day in sequence.
WEEKLY SUMO
TUWETHFRSA
(All day)
to select the program number.
to change the program number in
PG-1
PG- 2
PG- 3
PG- 4
or to select the desired time.
OFF timer display*
to select desired operation.
or to select desired temperature.
to select the desired fan speed.
to use 8°C operation.
to use ECO operation.
to use Hi POWER operation.
to use Silent operation.
to use FLOOR operation.
FLOOR
is pressed to confirm the setting 10.
to confirm
Operating Mode
Display after
pressing SET
button
Next operation Operating Temperature
time and Fan speed
*Point remote control at air conditioner receiving module
then, press SET button until you hear the "BeepBeep"
sound. This means the setting operation has been
completed. As the air conditioner is receiving the signal,
you will hear separate "Beep" sounds corresponding to
the number of days in the selected setting. An incomplete
setting is indicated if the TIMER lamp is blinking. Press
Notes :
1. Place the remote control where the indoor unit can
receive the signal. This will increase the accuracy
of the timing between the remote control and the air
conditioning unit.
2. The ON/OFF timer can be set during the WEEKLY
TIMER operation. In this situation, the air conditioner
will first follow the normal timer until it is complete;
then, it will return to the WEEKLY TIMER function.
3. During WEEKLY TIMER operation, all of operation
such as MODE, TEMP, FAN, Hi POWER, ECO and
etc., can be adjusted but when the clock reaches the
program setting, the operation will return to the set
items in the program.
is
4. When the remote control is sending a signal to the air
conditioner, avoid interference from objects that can
block the signal.
Edit Weekly timer program
To edit the program after confirming the weekly timer
setting, follow steps 1 - 3 below.
1. Press
• The day of the week and the program number of the
2. Press
press
confirmed.
• Resetting the operation.
3. Press
Deactivating WEEKLY TIMER operation
Press
• The "WEEKLY" indicator will disappear from the
LCD. However, the program will remain in the remote
control.
• The TIMER lamp goes off.
• To reactivate the WEEKLY TIMER operation,
press
The program after reactivation, is related to the clock
time.
To delete programs
The individual program
1. Press
• The day of the week and the program number is
• Select the day to delete the program.
2. Press
deleted.
3. Press
• ON or OFF timer will be cleared and the LCD will
4. Press
• Press
All programs
1. Press
• The day of the week and the program number will
2. Press
• All programs will be deleted and LCD displays
Notes :
Make sure the remote control receiving module on the air
conditioner receives the signal from the remote control.
6
twice.
.
current day will be displayed.
to select the day of the week and
to select program number to be
to exit confirming mode.
while "WEEKLY" is displayed on the LCD.
again, LCD shows the next program.
.
displayed.
to select the program number to be
.
blink.
to delete the program.
while the LCD is blinking.
The program has now been deleted.
.
be displayed.
and hold for 3 seconds.
current operation.
EN