JVC XV-S45GD Instructions Manual page 45

IMPORTANT!
you connect the component video output to your TV:
• set the DVD player ’s AV COMPULINK setting to DVD1.
• mak e the video/audio connection between the DVD player and your recei ver using the supplied audio/video cable, and do
not make the S-VIDEO connection.
Notes for connection
• If you connect a DVD player to a receiver via AV COMPU LINK in a system including a Dolby digital decoder, some functions
may not be performed automatically.
• The AV COMPU LINK terminal on some televisions indicates “II.” Do not connect the terminal indicating “II” with the AV
COMPU LINK terminal on a receiver. If connected, the system will not work correctly.
• Connect the AUDIO OUT jacks of the DVD player to the audio input jacks of a receiver that indicating “DVD.” Otherwise, the
system will not work correctly.
• There may be no description about connections to a DVD player in the instruction manual of a television or VCR. However a
television or VCR with AV COMPU LINK terminals indi cating “II” or “EX” can be connected to a DVD player.
Operation
You can enjoy pictures and/or sound by just putting a source component (which plays back the pictures and/or sound
such as a DVD player or VCR) into play mode. You do not have to operate the TV and receiver including not having to
perform power switching.
1
2
3
3
The following actions are performed automatically:
• Turning on the power for the television.
• Setting the source of the television to the external input (VIDEO-1 or VIDEO-2).
• Turning on the power for the receiver.
• Setting the source of the receiver to the component which has started playback.
Additional information
"!