Getting Started; Connections - JVC XV-S45GD Instructions Manual

Getting started

Connections

*In the following description, “TV” may be substituted with “monitor” or “projector.”
*Before using the unit, you have to connect the unit to a TV and/or amplifier.
Before making any connections
• Do not connect the AC power cord until all other connections have been made.
• Since different components often have different terminal names, carefully read the instructions supplied with the
component you are going to connect.
To connect to a TV
You can enjoy using the unit by simply connecting it to a TV. To improve audio sound quality, connect the audio outputs
to your separate audio equipment. (See the following pages.)
The unit
DIGITAL OUT VIDEO OUT
PCM / STREAM COMPONENT
Y P P
B R
COAXIAL
OPTICAL
RIGHT LEFT
S-VIDEO VIDEO
AUDIO OUT
Yellow
White
Red
S-video cable
(not supplied)
Connect the unit to a TV equipped with stereo audio input and video input jacks using the supplied audio/video cables.
• If your TV has a monaural audio input instead of stereo, you need to use an optional audio cable which c onverts stereo
audio output to monaural.
• If your TV has an S-video input, you should connect it with the S-VIDEO output of the unit using the S-video cable in
addition to the (standard) video connection to get better picture quality.
NOTES
• Connect VIDEO OUT of the unit directly to the video input of your TV. Connecting VIDEO OUT of the unit to a TV via a VCR may
cause a monitor problem when playing back a copy-protected disc.
• Connect the unit to an NTSC television. Do not connect the unit to a PAL television.
AV COMPU LINK
: except XV-S30BK
Audio/Video cable
(supplied except XV-S30BK)
*
If the TV has an AV COMPU LINK terminal,
you can use the AV COMPU LINK function
(except XV-S30BK).
See "AV COMPU LINK remote control
system" on page 42 for details.
T V
IN
S-VIDEO
VIDEO
Yellow
LEFT
White
RIGHT
Red
AUDIO
!