Setting Up Your Scanner - Kodak S3120 Max User Manual

Setting up your scanner

10
Follow these steps from the Installation Guide.
1. Attach the correct AC plug adapter to the power supply. Attach the power
supply to the scanner, and then to a power outlet.
NOTE: If your scanner model is either the S3120 Max or the S3140 Max,
manually open the input tray before proceeding to step 2.
2. Turn the scanner on by pressing the power button on the front of the
scanner. When you turn on the scanner, the input tray will open if it is not
already opened and the power button will flash for a few seconds.
3. The language screen will be displayed, unless the scanner was previously
configured. If the language screen is displayed, select a language.
4. If the scanner was previously configured, you can reset the scanner so it
will start this set up again:
• Press on the scanner's display to open the Settings menu.
• Scroll down to "Reset", then press it.
• Follow any prompts.
A-61981 20 April 2022