Canon RowerShot V10 Advanced User's Manual page 182

Connecting Manually to Detected Networks
Instructions in this section are continued from
Connect to an access point by selecting its SSID (or ESS-ID) in a list of active access points
nearby.
Selecting the access point
1.
Select an access point on the [Select a network] screen.
(1) SSID
(2) Security icon (only for encrypted access points)
(3) Channel used
Note
[Refresh]
To display [Refresh], scroll down the screen in step 1.
Select [Refresh] to search for access points again.
Turn the < > dial to select the access point to connect to in the list of
access points.
Checking the Type of Access
182
Point.