Table of Contents
Advertisement
3.
Connect to the access point.
Press the access point's WPS button. For details on where the button
is and how long to press it, refer to the access point user manual.
Select [OK] to initiate connection with the access point.
The following screen is displayed once the camera is connected to the
access point.
4.
Select [Auto setting].
Select [OK].
If an error is displayed for [Auto setting], set the IP address manually
(
).
5.
Complete the streaming settings in Camera Connect.
Select the streaming platform you will use, then configure the settings
accordingly.
You can enter a URL on the screen to select a streaming site.
As the streaming quality, select 6 Mbps or 3.5 Mbps, depending on the
communication environment.
166
Advertisement
Table of Contents
