Connecting The Analog Bus - HP E1343A User Manual

Connecting the Analog Bus

Figure 2-2. Analog Bus Connections Between Multiplexer/Multimeter Modules
22 Configuring the Relay Multiplexer Modules
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Figure 2-2 shows how to connect the analog bus between multiple
multiplexer modules and to the HP E1326 Multimeter. Use the cables
shipped with the multiplexer modules to connect the analog bus of the
multiplexer modules. Use the cable shipped with the HP E1326 Multimeter
to connect the analog bus of the multiplexer module to the Multimeter input.
These cables are needed to connect the MUX when mounted in the E1403
Module Carrier to the E1411A/B DMM in a C-size cardcage. They must be
ordered separately.
1. Connecting E1411 to RELAY MUXs: use E1326-61611
(long analog bus cable).
2. Connecting RELAY to RELAY or RELAY to FET MUX:
use E1400-61605.
Chapter 2