Replacing The Display Assembly; Procedure; Post-Requisites - Dell Inspiron 20-3052 Service Manual

Replacing the display assembly

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Procedure

1 Replace the rubber
2 Slide the tabs on the display assembly into the slots on the display-
assembly base.
3 Replace the display-assembly base on the display assembly.
4 Replace the screws that secure the display-assembly base to the display
assembly.
5 Route the optical-drive data cable, touch-board cable, display backlight
cable, hard drive cables and control-buttons board cable through the
routing guides on the display-assembly base.
6 Replace the screws that secure the optical-drive data cable to the
display-assembly base.

Post-requisites

1 Replace the display
2 Replace the system
3 Replace the wireless
4 Replace the speakers.
5 Replace the memory
6 Replace the heat
7 Replace the fan.
8 Replace the camera.
9 Replace the system-board
10 Replace the microphone.
11 Replace the control-buttons
computer. After working inside your
feet.
cable.
board.
card.
module.
sink.
shield.
board.
After working inside your
75