Replacing the camera
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Adhere the camera to the camera frame.
2
Connect the camera cable to the camera module.
3
Press the camera frame down into the slot on the display bezel until it
snaps into place.
4
Route the camera cable and antenna cable through the routing guides on
the display-assembly base.
5
Connect the microphone and camera cable to the system board.
Post-requisites
1
Replace the
system-board
2
Replace the
back
3
Follow the procedure in step 4 in
4
Replace the stand.
computer. After working inside your
shield.
cover.
"Replacing the optical
After working inside your
drive".
51