Table of Contents
Advertisement
3.2
Connecting Modules
This section explains the procedure for connecting modules with an
example of how to connect the head module with the L61P.
Shut off the external power supply for the system in all phases before
connecting modules.
Release
(1)
Lock
1. To release the module joint levers
located at the top and bottom of the
head module:
2. Slide the levers toward the front side of
the module until they click. To release
the levers, pull the projection (1) of the
lever.
3. Insert the connector of the power
supply module into that of the CPU
module so that they are securely
engaged.
4. To lock the head module joint levers:
35
(To the next page)
Advertisement
Table of Contents
