Troubleshooting; Error Messages - Husqvarna DXR140 Operator's Manual

Error messages

There are two types of error messages that can appear on the display:
• Service messages - These messages do not represent any direct danger for the operator or the machine.
• Warnings - These warn of faults or safety defects that can cause mechanical damage.
All error messages that have been acknowledged remain as small yellow red warning triangles in the field for service
and can be accessed by bringing up the service menu and selecting "Warnings". The messages are listed in order of
priority, highest priority first.
When a fault that has in some way restricted the machine's functions ceases, a message appears on the display. This
message must be acknowledged for the machine to return to full functionality.
Service messages
Message on the display
Oil filter need to be changed
Low hydraulic oil level
Low battery
Left joystick button on left joystick activated
during power up. Button has been disabled.
Right joystick button on left joystick activated
during power up. Button has been disabled.
Left joystick button on right joystick activated
during power up. Button has been disabled.
Right joystick button on right joystick
activated during power up. Button has been
disabled.
Up/Down movement on left joystick activated
during power up. Up/Down movement has
been disabled.
Left/Right movement on left joystick activated
during power up. Left/Right movement has
been disabled.
Up/Down movement on right joystick
activated during power up. Up/Down
movement has been disabled.
Left/Right movement on right joystick
activated during power up. Left/Right
movement has been disabled.
Connection to terminal radio failed. Please
check battery level and restart terminal.
Cable connection established between
terminal and machine but no control modules
found. Please check cable and control
modules.
Radio connection established between
remote control and machine but no control
modules found. Please check control
modules and CAN connection in machine.

TROUBLESHOOTING

Indication on the
machine
Flashes 3 times with
the work lighting.
No indication on
machine.
Cause
The oil filter must be
replaced.
Oil level is low.
Low battery level in
terminal.
Joystick activated
during terminal start
up.
The terminal can not
communicate with the
terminal radio
The terminal can
connect to the
machine but not to
PLC modules.
The terminal can
connect to radio in the
machine but not to
PLC modules.
Possible action
Replace the oil filter.
Fill in more oil.
Change battery or
connect orange cable.
Check joystick value in
test menu (terminal
diagnostics). Restart
terminal.
Change battery, check
cables to terminal
radio.
Check fuses to the PLC
moduels, check supply
and CAN cables to the
modules.
English – 49