Table of Contents
Advertisement
1MRS757274
1.
1.1.
1.2.
1.3.
Station Automation COM600 3.5
External OPC Server User's Manual
About this manual
Copyrights
The information in this document is subject to change without notice and should not be
construed as a commitment by ABB Oy. ABB Oy assumes no responsibility for any
errors that may appear in this document.
In no event shall ABB Oy be liable for direct, indirect, special, incidental, or consequential
damages of any nature or kind arising from the use of this document, nor shall ABB Oy
be liable for incidental or consequential damages arising from use of any software or
hardware described in this document.
This document and parts thereof must not be reproduced or copied without written per-
mission from ABB Oy, and the contents thereof must not be imparted to a third party
nor used for any unauthorized purpose.
The software or hardware described in this document is furnished under a license and
may be used, copied, or disclosed only in accordance with the terms of such license.
Copyright 2011 ABB. All rights reserved.
Trademarks
ABB is a registered trademark of ABB Group. All other brand or product names men-
tioned in this document may be trademarks or registered trademarks of their respective
holders.
General
This manual provides thorough information on the External OPC Server and the central
concepts related to it. You find instructions on how to configure External OPC Server
related objects. The basic operation procedures are also discussed.
Information in this user's manual is intended for application engineers who configure
the External OPC Server.
This user's manual is divided into following sections:
Introduction
This section gives an overview of the External OPC Server and its features.
5
Advertisement
Table of Contents
