Related Manuals for ARAG 853 Series
Summary of Contents for ARAG 853 Series
- Page 1 ELECTRIC BALL VALVE - GEAR MOTOR WITH POSTION INDICATOR 853 SERIES INSTALLATION, USE AND MAINTENANCE...
-
Page 2: Table Of Contents
CONTENTS Technical data ..........................Images .............................. Field of application ......................... Limitations of use ........................... Safety Regulations .......................... Maximum operating pressure ......................6.1 Overall dimensions ..........................Installation ............................7.1 Geared motor rotation ........................7.2 Attachment ............................7.3 Types of bolts ............................ 7.4 Drilling template .......................... -
Page 3: Technical Data
TECHNICAL DATA UHMW AISI 316 Coupling Tightening torque (1 - 1 - 1) BALL BALL (1 - 1 - 1) WAYS CODE @ 12 Op. time mm Nm inch/lib 853Rx 4xxx 1.4 sec. 853Tx 4xxx (3 way bottom 853Rx 4xxxJ connection only: 1"... -
Page 4: Images
IMAGES Fig. I Fig. II 2 ways 3 ways side connection Fig. III Fig. IV *Not present on all models 3 ways bottom connection Fig. V Fig. VI 2 wire connection 3 wire connection Fig. VII Fig. VIII... - Page 5 2 ways 0° 90° 3 ways - bottom connection 0° 180° 3 ways - side connection J 0° -90° 3 ways - side connection 0° -90°...
-
Page 6: Field Of Application
FIELD OF APPLICATION The 853 series electric valves are designed for use in the agricultural sector and can be used as flow switches in a system under pressure for conveying liquids. These valves are for professional use only. LIMITATIONS OF USE The 853 series electric valves may not be used: - as safety valves;... -
Page 7: Maximum Operating Pressure
It is therefore very important to perform this operation by thoroughly observing the instructions provided in document D30058, that is available for download in the website www.aragnet.com/download. ARAG will not be held responsible for any damage to the system, people, animals or things caused by modifications to the ball valve and/or failure to follow the guidelines outlined in the mentioned documents. -
Page 8: Types Of Bolts
The valve must be powered by means of the connector fixed to the geared motor. To connect the valve, use suitable cables available on the Arag catalog. Connect the gearmotor connector to that of the relevant harness; after making sure it is correctly inserted, press until it is locked - Fig. -
Page 9: Use
MAINTENANCE The electric ball valves of the 853 series do not require any particular maintenance. Internal cleaning can be carried out when the system to which the valve is connected is cleaned. If the maintenance man needs to open the valve to check the seal or for extraordinary cleaning, before fitting it back you must replace the seal kit of the orifice that was opened. - Page 10 This manual is an integral part of the equipment to which it refers and must accompany the equipment in case of sale or change of ownership. Keep it for future reference; ARAG reserves the right to modify the specifications and instructions regarding the product at any time and without prior notice.
Need help?
Do you have a question about the 853 Series and is the answer not in the manual?
Questions and answers