Hawksmoor 95074 User Instructions page 27

2) Replace the spool either with a new replacement spool or a rewind spool. To rewind the spool:
a. Use 1.6mm diameter cutting line only.
b. Insert about 3mm of the line into the hole in the spool.
c. Ensure the replacement line is evenly wound onto the spool and the line is not loose. Line
must be wound in the direction of the arrow shown on the spool and the length should not
exceed 6.5m.
Catch
3) Secure the spool back to the spool carrier by inserting the line through the eyelet in the spool
carrier and slide the spool into it.
www.coreservice.co.uk
Hotline: +44 01904 947568
Email support@coreservice.co.uk
Lock
FIG Q FIG T
27