Logik LNFD55W18 Installation Instructions Manual page 12

Installation
6. Remove both levelling feet, levelling feet
fix board and bottom hinge. Swap the
position of the levelling feet fix board with
the bottom hinge.
• Do not lay the unit flat as this
may damage the coolant system.
• During door reversal, when
swapping the position of the
bottom hinge or adjusting the
levelling feet, tilt the unit. Do not
lay the unit flat.
7. On the bottom hinge, move the position
of the bottom hinge pin to the other hole.
Tighten the pin securely.
8. Screw the levelling feet fix board, bottom
hinge and levelling feet tightly on their
new position.
9. Remove the middle hinge hole covers and
swap their position with the middle hinge.
Reverse the middle hinge.
12