Related Manuals for Logik LUC50S12
Summary of Contents for Logik LUC50S12
- Page 1 Instruction / Installation Manual 50cm Silver Undercounter Fridge Freezer LUC50S12...
-
Page 3: Table Of Contents
Contents Unpacking ............................. 4 Safety Warnings ..........................5 Installation ............................ 7 Location ..................................7 Levelling the Unit ..............................7 Free Space Requirements ............................7 Reversing the Door Swing .............................8 Cleaning Before Use ............................. 12 Before Using Your Unit ............................12 Product Overview ........................13 Operation ............................ -
Page 4: Unpacking
Thank you for purchasing your new Logik Fridge Freezer. We recommend that you spend some time reading this instruction manual in order that you fully understand all the operational features it offers. Read all the safety instructions carefully before use and keep this instruction manual for future reference. -
Page 5: Safety Warnings
Safety Warnings For your continued safety and to reduce the risk of injury or electric shock, please follow all the safety precautions listed below. • Read all instructions carefully before using the unit and keep them for future reference. • Retain the manual. If you pass the unit onto a third party, make sure to include this manual. - Page 6 • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
-
Page 7: Installation
Installation INSTALLATION Location When selecting a position for your unit you should make sure the floor is flat and firm, and the room is well ventilated with an average room temperature of between 16°C and 32°C. Avoid locating your unit near a heat source, e.g. cooker, boiler or radiator. Also avoid direct sunlight as it may increase the electrical consumption. -
Page 8: Reversing The Door Swing
INSTALLATION Benefits of increased ventilation: • Lowered power consumption • Improved cooling performance • Reduce running costs • Prolong product life span Reversing the Door Swing Tools required: Phillips style screwdriver / Flat bladed screwdriver / Hexagonal spanner • Ensure the unit is unplugged and empty. •... - Page 9 INSTALLATION 3. Remove the top left screw cover. 4. Move the core cover from left side to right side. And then lift the upper door and place it on a padded surface to prevent it from scratching. 5. Take off the middle hinge by removing the screws.
- Page 10 INSTALLATION 8. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it. Unscrew Screw 9. Refit the bracket fitting the bottom hinge pin. Replace both adjustable feet. Transfer the lower door to the property position. Screw 10.
- Page 11 INSTALLATION 11. Make the middle hinge reverse the direction 180°C, then transfer it to the left property position. Make the middle hinge pin in the upper hole of the lower door, then tight the bolts. Ensure the freezer door is aligned horizontally and vertically, so that the seals are closed on all sides before finally tightening the hinge.
-
Page 12: Cleaning Before Use
INSTALLATION Cleaning Before Use Wipe the inside of the unit with a weak solution of bicarbonate soda. Then rinse with warm water using a ‘wrung-out’ sponge or cloth. Wash the shelves and salad bin in warm soapy water and dry completely before replacing in the unit. Clean the exterior of the unit with a damp cloth. -
Page 13: Product Overview
Product Overview Freezer Freezer Door Compartment Thermostat Upper Fridge Control & Light Door Shelf Fridge Glass Shelves Fridge Door Fridge Glass Shelf above Salad Bin Salad Bin Lower Fridge Door Shelf Adjustable Feet... -
Page 14: Operation
Operation Switching On Your Unit 1. Connect the mains cable to the mains socket. The internal temperature of your unit is controlled by a thermostat. There are eight settings, of which position 7 is the coldest and position 0 turns the unit off. 2. -
Page 15: Preparations For Freezing
• Always let pre-cooked food cool down before you put in the unit. This will help to maintain the internal temperature of the unit. • To prevent cold air escaping from the unit, try to limit the number of times you open the door. -
Page 16: Cleaning
Cleaning Defrosting Frost might build up in the freezer compartment after it has been used for a period of time. Scrape away the frost using a plastic scraper. Do not use a metal or sharp instrument to scrape away the frost, nor should you use any electrical appliances to aid defrosting. -
Page 17: Maintenance
Maintenance Changing the Internal Light 1. Before carrying out the bulb replacement always adjust the thermostat control dial to Position OFF, then disconnect the mains supply. 2. Use a flat bladed screwdriver and gently prise off the light bulb cover. 3. -
Page 18: Specifications
Specifications Model LUC50S12 Appliance Category Category 7 (Refrigerator – Freezer) Overall Dimension (W x D x H) 480 x 520 x 850 mm Fresh Food Storage Compartment Volume Frozen Food Storage Volume Defrosting Type Manual Defrost Climate Class This appliance is intended to be used at an ambient temperature between 16°C and 32°C. - Page 20 For more information about where you can drop off your waste for recycling, please contact your local authority, or where you purchased your product. DSG Retail Ltd. (co. no. 504877) Maylands Avenue, Hemel Hempstead, Herts., HP2 7TG, UK. IB-LUC50S12-140429V2...
Need help?
Do you have a question about the LUC50S12 and is the answer not in the manual?
Questions and answers