Concrete Curing Function - Samsung MIM-E03CN Installation Manual

Concrete curing function

When pipes of floor heating are installed, operation for reinforcing concrete curing is applied. (Period of operation: 23 days)
Entering procedure
1. After turning off the DIP switch K3 (3rd switch of SW03) of control kit (Default ON), turn off and turn on the control kit. The
operation for concrete curing starts automatically. (If blackout occurs and communictation restarts later, operation will
continue.)
2. Temperature of discharge water is controlled as time goes on like below.
[Temp.]
Initial
Classification
Heating
Time 96
Temperature 30
3. Remaining days are displayed on the wired remote controller during operation but key operation is unavailable.
Remaining days are
displayed.
❋ If an error is displayed, concrete curing function does not work.
38
Step raise
72 24 24 24
55 30 35 40
Heating
24 24 144
45 50 55
Concrete Curing
Remaining days:
[Day]
Step down
24 24 24 24
50 45 40 35
Total
(Hour)
24 552
30 -