Sony Tektronix VX4792 User Manual page 243

Performance Verification
F-10
Slot 0 Resource Manager
Controller
GPIB Cable
Figure F-2: Basic System Configuration
7. Load the Performance Check Disk onto the hard disk of the computer at the
directory that contains IBIC.
8. On the computer, change the directory to the directory where IBCONF is
located.
9. To invoke IBCONF, type:
IBCONF <RETURN>
Change the Device Characteristics Parameters for DEV1 as shown in
Table F–4.
Table F-4: VX4792 Device Characteristics Parameters
Parameter
Primary GPIB Address
Secondary GPIB Address
Timeout Setting
EOS Byte
Terminate Read on EOS
Set EOI with EOS on Write
Type of Compare on EOS
Set EOI with Last Byte of Write
10. Reboot your computer if necessary.
VX4792
VXIbus Mainframe
Setting for VX4792 (DEV1)
1
97
T10s
0AH
NO
NO
7 Bit
YES
VX4792 User Manual