Parameters - Siemens SIMATIC ET 200SP Manual

4.2

Parameters

Parameters of the AI 4xI 2-/4-wire ST
The effective range of the parameters depends on the type of configuration. The following
configurations are possible:
● Central operation with an S7-1500 CPU
● Distributed operation on PROFINET IO in an ET 200SP system
● Distributed operation on PROFIBUS DP in an ET 200SP system
When assigning parameters in the user program, use the "WRREC" instruction to transfer
the parameters to the module using the data records; refer to the section Parameter
assignment and structure of the parameter data record (Page 27).
The following parameter settings are possible:
Table 4- 2 Settable parameters and their defaults (GSD file)
Parameter
Diagnostics
No supply voltage L+
Diagnostics
Short-circuit to ground
Diagnostics
Overflow
Diagnostics
Underflow
Diagnostics
Wire break
Measuring type/range
Analog Input Module AI 4xI 2-/4-wire ST (6ES7134-6GD00-0BA1)
Manual, 07/2014, A5E03551866-AC
Value range
Disable
•
Enable
•
Disable
•
Enable
•
Disable
•
Enable
•
Disable
•
Enable
•
Disable
•
Enable
•
deactivated
•
Current (4-wire
•
transducer) 0..20 mA
Current (4-wire
•
transducer) 4..20 mA
Current (4-wire
•
transducer) +/-20 mA
Current (2-wire
•
transducer) 0..20 mA
Current (2-wire
•
transducer) 4..20 mA
Default Configuration
in RUN
Disable yes
Disable yes
Disable yes
Disable yes
Disable yes
Current yes
(4-wire
transducer)
4..20 mA
Parameters/address space
4.2 Parameters
Effective range
with configuration software,
e.g. STEP 7 (TIA Portal)
GSD file GSD file
PROFINET IO PROFIBUS DP
Module Module
Module Module
Module Module
Module Module
Module Module
Channel Channel
13