Husqvarna AUTOMOWER 420 Operator's Manual page 24

Weather timer
•
Installation
•
Settings
•
Accessories
•
Menu structure overview 1 on page 10 , Menu
Refer to
structure overview 2 on page 11 and Menu structure
overview 3 on page 12 .
4.2.3 Schedule
Note:
The lawn should not be cut too often to obtain
the best result. If the product is allowed to operate too
much, the lawn may appear flattened. The product is
also subjected to unnecessary wear.
4.2.3.1 To set the schedule
To get access to the menu in the
1. Do steps 1–3 in
display of the product on page 23 .
2. Use the arrow buttons and the OK button to move
through the menu structure
3. Use the arrow buttons and the OK button to select
the day.
4. Use the right arrow button to select the period.
5. Push the OK button.
6. Calculate the suitable operating hours. Refer to
To calculate the suitable operating hours on page
24 .
7. Enter the time with the number buttons. The
product can cut the grass 1 or 2 periods each day.
8. If the product must not cut grass on a specified
day, unselect the box adjacent to the 2 time
periods.
4.2.3.2 To calculate the suitable operating hours
If the work area is less than maximum product capacity,
the schedule should be set to minimize wear on the lawn
and the product.
1. Calculate the dimension of your lawn in m
2 2
2. Divide the m / ft
daily operation capacity. Refer to table below.
3. The result is equal to the number of hours that the
product must mow each day. The number of hours
24 - Product settings
Schedule > Overview .
of the lawn with the approximate
includes both mowing, searching and charging
time.
Product work capacity
Automower
Automower
Automower
Automower
Example: A lawn of 500 m
Automower
2
500 m / 92 ≈ 5.5 h.
2
5400 ft / 990 ≈ 5.5 h.
Days / week
7
4.2.3.3 To copy the schedule setting
1. Do steps 1–3 in
display of the product on page 23 .
2. Use the arrow buttons and the OK button to move
through the menu structure
Copy .
3. Use the arrow buttons and the OK button to copy
the schedule setting. You can copy the schedule
settings day to day or for the full week.
4.2.3.4 To reset the schedule setting
You can remove all schedule settings and use the
factory setting.
1. Do steps 1–3 in
display of the product on page 23 .
2. Use the arrow buttons and the OK button to move
through the menu structure
Reset .
a)
2 2
/ ft .
b)
3. Push the OK button.
Approximate daily operation
capacity, m
®
420 92 / 990
®
430X 133 / 1430
®
440 167 / 1800
®
450X 208 / 2240
2
/ 5400 ft
®
420.
h / day
5.5
To get access to the menu in the
Schedule > Overview >
To get access to the menu in the
Schedule > Overview >
Push the arrow buttons to select
day to only reset the current day to factory
settings.
Push the arrow buttons to select
reset all schedule settings to factory settings.
1201 - 007 - 20.02.2023
2 2
/h, ft /h
2
, cut with a
Suggested sched-
ule setting
07:00- 12:30 / 7:00
am - 12:30 pm
Current
All week to