Change Verification Code; Set Ehome Parameters - HIKVISION DS-K1T804A Series User Manual

7.4.3 Change Verification Code

You can change the device verification code before you add the
device to the Hik-Connect mobile client.
Before You Start
Make sure your device has connected to a network.
Steps
1. Move the cursor and select Comm. → Mobile-App .
2. Input a new device verification code in the Verification Code.
Result
The device verification code is changed. You should input the new
verification code when you add the device to the Hik-Connect
mobile client.

7.4.4 Set EHome Parameters

Set EHome parameters and the device can upload data via
EHome protocol.
Before You Start
Make sure your device has connect to a network.
Steps
1. Move the cursor and select Comm. → EHome .
2. Enable the EHome function and set the EHome server
parameters.
Center Group 1
Enable center group 1 and the data will be uploaded to the
center group.
EHome
Enable EHome function and the data will be uploaded via
EHome protocol.
Address Type
Select an address type according to your actual needs.
IP Address
Set the EHome server's IP address.
Port No.
Set the EHome server's port No.
EHome Version
Set the EHome version according to your actual needs. If you
choose V5.0, you should create an account and EHome key.
If you choose other version, you should create an EHome
account only.
Figure 7-3 EHome Settings
15