Philips 40PUG6300 User Manual page 55

Sound settings
Bass
With Bass, you can adjust the level of low tones in the
sound.
To adjust the level . . .
1 - Press  and select Setup and press OK.
2 - Select TV settings > Sound > Bass.
3 - Press  (right) and adjust the value
with  (up) or  (down).
4 - Press  , repeatedly if necessary, to close the
menu.
Treble
With Treble, you can adjust the level of high tones in
the sound.
To adjust the level . . .
1 - Press  and select Setup and press OK.
2 - Select TV settings > Sound > Treble.
3 - Press  (right) and adjust the value
with  (up) or  (down).
4 - Press  , repeatedly if necessary, to close the
menu.
Surround mode
With Surround mode, you can set the sound effect of
the TV speakers.
To set the surround mode . . .
1 - Press  and select Setup and press OK.
2 - Select TV settings > Sound > Surround mode.
3 - Press  (right) and select Stereo or Incredible
surround.
4 - Press  , repeatedly if necessary, to close the
menu.
Headphones volume
With Headphones volume, you can set the volume of
the connected headphones separately.
To adjust the volume . . .
1 - Press  and select Headphones volume and
press OK.
2 - Press  (up) or  (down) to adjust the volume.
3 - Press  , repeatedly if necessary, to close the
menu.
Advanced sound settings
Auto volume leveling
With Auto volume leveling, you can set the TV to
automatically level out sudden volume differences.
Typically at the beginning of adverts or when you are
switching channels.
To turn on or off . . .
1 - Press  and select Setup and press OK.
2 - Select TV settings > Sound > Advanced > Auto
volume leveling.
3 - Press  (right) and select On or Off.
4 - Press  , repeatedly if necessary, to close the
menu.
TV speakers
You can send the TV sound to a connected audio
device - a Home Theater System or audio system.
With TV speakers, you select where you want to hear
the TV sound and how you want to control it.
• If you select Off, you permanently turn off the TV
speakers.
• If you select On, the TV speakers are always on.
With an audio device connected with HDMI CEC, you
can use one of the EasyLink settings.
• If you select EasyLink, the TV sends the TV sound to
the audio device. The TV will turn off the TV speakers
when the device is playing the sound.
• If you select EasyLink autostart, the TV will turn on
the audio device, send the TV sound to the device
and turn off the TV speakers.
With EasyLink or EasyLink autostart selected, you
can still switch to TV speakers or device speakers in
the Picture and sound menu.
To set the TV speakers . . .
1 - Press  and select Setup and press OK.
2 - Select TV settings > Sound > Advanced > TV
speakers.
3 - Press  (right) and select Off, On, EasyLink or
EasyLink autostart.
4 - Press  , repeatedly if necessary, to close the
menu.
To switch speakers directly . . .
1 - While watching TV, press  .
2 - Select Speakers then TV or Amplifier (audio
device).
3 - Press  , repeatedly if necessary, to close the
menu.
55