Page 2
Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
Page 4
Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
instructions for safety and environment This section contains safety Never touch the plug with • instructions that will help to get wet hands! Never unplug by protected from risk of personal pulling on the cable, always injury or property damage. Failure pull out by grabbing the plug.
instructions for safety and environment Children’s safety This appliance is intended • to be used in household and Electrical products are • similar applications such as: dangerous for the children. - Staff kitchen areas in shops, Keep children away from the offices and other working product when it is in use.
instructions for safety and environment Package information 1. Unplug the product before transporting it. Packaging materials of the 2. Remove water drainage and product are manufactured water supply connections. from recyclable materials in accordance with our National 3. Drain the remaining water in Environment Regulations.
Dishwasher Technical specifications Compliance to standards and test data / EC declaration of conformity This product complies with the following EU directives; Development, production and sales stages of this product comply with the safety rules included in all pertaining European Community regulations. 2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242 Power input 220-240 V, 50 Hz (see rating label)
Installation Appropriate installation Refer to the nearest Authorised Service Agent for installation of your product. To location make the product ready for use, make sure Place the product on a solid and flat • that the electricity, tap water supply and floor that has sufficient load carrying water drainage systems are appropriate capacity! The product must be...
Installation Permitted water temperature: up Aquasafe+ to 25°C (depends on model) The dishwasher may not be connected to The Aquasafe+ system protects against open warm water devices or flow-through water leaks that may occur at the hose water heaters. inlet.Water contact with the valve box of Do not use old or used water inlet •...
Installation The voltage and allowed fuse or breaker • protection are specified in the “Technical specifications” section. If the current value of the fuse or breaker in the house is less than 16 Amps, have a qualified electrician install a 16 Amp fuse. The specified voltage must be equal to •...
Preparation Tips for energy saving Adjusting the water softening system Following information will help you use the product in an ecological and energy- Cleaning, rinsing and drying performance of efficient manner. your dishwasher will increase when water Wipe away any coarse food remnants on softening system is adjusted properly.
Page 15
Preparation 1 min. 1 Second 1 Minute Remove the test Turn on the tap and Hold the test strip in Remove the test Wait for 1 minute. The test strip shows strip from the let the water run for the water for about strip from the water you the hardness packet.
Preparation If the hardness level of the supply water We recommend using granular is above 90 °dF or if you are using well or powder softening salts. Do water, then it is recommended to use water not use salts that are insoluble purification devices and special filters.
Preparation Before initial use, fill the water Since different salt brands in the softening system with 1 litre of market have different particle water (C). sizes and since the water hardness may vary, dissolution of the salt in water may take a couple of hours.
Preparation Do not put solvents into the If dishes have been waiting detergent dispenser. There is for a long time and have risk of explosion! dried residues, fill the 5 cm³ compartment too (2). Put the detergent into the detergent dispenser just before operating the 3.
Preparation Rinse aid as 3in1, 5in1, Allin1 etc. They function only up to a specific degree of water The rinse aid used in hardness. Above this limit regeneration dishwashers is a special salt and rinse aid must be added. Refer to combination used to increase the instructions on the packaging of the drying efficiency and prevent...
Page 20
Preparation Placing the dishes into the decreased. This is set to position 4 as factory default. dishwasher You can use your dishwasher in the 4. Close the lid of the reservoir by optimum way with respect to energy pressing on it lightly. consumption and washing and drying Wipe clean any spilled rinse performance only if you place the dishes in...
Page 21
Preparation Suggestions for loading the dishwasher Improper Loading Of Dishware Lower basket Upper basket Improper Loading Of Dishware Dishwasher / User’s Manual 19 / 51 EN...
Preparation Silverware basket piece Silverware basket (depends on model) (depends on model) You can place your forks, spoons and etc. Silverware basket is designed to wash your to upper basket with the additional piece in dishes such as fork, spoon and etc. in a the figure..
Preparation Cutlery basket Cutlery basket (depends on model) (depends on model) Cutlery basket is designed to wash your Cutlery basket is designed to wash your dishes such as knife, fork, spoon, etc. in an dishes such as knife, fork, spoon, etc. in an efficient manner.
Preparation Collapsible lower basket wires (6 pieces) (depends on model) The foldable wires (A) located at the lower basket of the machine are designed for an easier placement of large pieces such as pans, bowls, etc. You can create larger spaces by folding each wire individually or all them at once.
Preparation Collapsible lower basket Collapsible lower basket wires (4 pieces) wires (2 pieces) (depends on model) (depends on model) The four piece foldable wires located at the The two piece foldable wires located at the lower basket of the machine are designed lower basket of the machine are designed for an easier placement of large pieces for an easier placement of large pieces such...
Preparation Collapsible lower basket tines (depends on model) There are foldable tines (A) located at the lower basket of the machine are designed for an easier placement of large pieces such as pans, bowls, etc. You can create larger spaces by folding each tines individually or all of them at once.
Preparation Collapsible lower basket tines (depends on model) There are foldable tines (A) located at the lower basket of the machine are designed for an easier placement of large pieces such as pans, bowls, etc. You can create larger spaces by folding each tines individually or all of them at once.
Preparation SoftTouch Accessory Tray Wash Supports (depends on model) (depends on model) The SoftTouch Accessory found in the Use the supports to wash trays in the lower basket of your machine enables a bottom basket. safe washing for your fragile glasses. See the Auxiliary functions section for appropriate programme and function selection.
Preparation Lower basket multipurpose Make sure that the impeller / height adjustable service does not touch the dishes you rack placed on the racks. (depends on model) To close the racks: This accessory located at the lower basket Fold the rack (A). of your machine allows you to easily wash 2.
Preparation Upper basket glass support Upper basket height piece adjustable rack (depends on the model) (depends on model) When placing long stemmed glasses or Use the lower and upper parts of the height wine glasses, do not lean them against adjustable racks in the upper basket of other pieces but to the edge of the basket the machine by sliding them down or up...
Preparation Upper basket glass support Collapsable upper basket piece wires (depends on the model) (depends on the model) When placing long stemmed glasses or To bring the collapsable wires on the upper wine glasses, do not lean them against basket of the machine into horizontal other pieces but to the edge of the basket position, press on the latch (1).
Preparation Collapsible upper basket Collapsible upper basket tines tines (depends on model) (depends on model) There are foldable tines on the upper Upper basket of the machine is equipped basket of the machine that you can lay with tines with gradual folding system (A) down when you need larger space for big that you can lay down when you need a dishes.
Preparation Adjusting the height of the upper basket (depends on model) Basket adjustment mechanism on the loaded upper basket of the machine is designed to allow you create taller areas in the upper or lower section of the machine based on your requirements by adjusting the height of the loaded basket in up or down directions.
Preparation Adjusting the height of loaded upper basket (depends on model) Basket adjustment mechanism on the upper basket of the machine is designed to allow you create wider areas in the upper or lover section of the machine based on your requirements by adjusting the height of the loaded basket in up or down directions without removing it from the machine.
Preparation Height setting with empty basket (depends on model) In this model, the height setting of the upper basket may be changed using the wheels which are mounted at two different heights. Release the latches on both the right and left tracks of the upper basket by pushing them outwards Pull out the basket out completely.
Preparation Upper cutlery basket (depends on model) The upper cutlery basket is designed for small dishes, or long items that cannot fit into the lower cutlery basket. After taking out the basket by lifting it up, remove the carrier part from the rails by pulling it towards yourself (C).
Operating the product On/Off key 2. Programme Selection / Programme Cancel (3 seconds) key 3. Function keys Half Load Function Fast+ Function SteamGloss Function AquaIntense Function 4. Programme indicator 5. Salt indicator Not in use 7. Start / Cancel indicator 8.
Operating the product Keys Programme selection On/Off key Press the On/Off button to turn on When you press On / Off key, indicator lights your machine. illuminate on the display for ON position. 2. Check the Salt and Rinse Aid indicators The lights turn off in OFF position.
Operating the product Auxiliary functions AquaIntense Function AquaIntense impeller Washing programmes of your dishwasher located under the are designed to obtain the best cleaning lower impeller helps effect, considering the type of the soiling, washing your heavily soiling degree and properties of the dishes soiled dishes places in to be washed.
Operating the product Interior Lighting 2. Press P / P+ key to activate the S: (Depends on the model) position. Some models have interior lighting to 3. Each pressing on the Time Delay key illuminate the interior when the door is will change the warning sound volume opened.
Operating the product Changing the settings while Time Pay attention not to open the Delay function is active door of the machine when it is While the Time Delay function is activated, running. There may be a rush of you cannot make changes in the washing vapour when you open the door programme, auxiliary functions or the of your machine;...
Operating the product Water cut-off warning Rinse Aid indicator ( ) If mains water is cut or water inlet tap is Please check the rinse aid indicator on the turned off the machine cannot take water display to see whether there is adequate in and E:02 icon will flash on the programme amount of rinse aid in the dishwasher or indicator.
Maintenance and cleaning Cleaning the filters Service life of the product extends and frequently faced problems decrease if it is Clean the filters at least once a week in cleaned at regular intervals. order for the machine operates efficiently. Unplug the product and turn off Check if food residues are left on the filters.
Maintenance and cleaning Cleaning the hose filter Damages on the machine that may be caused by impurities coming from the urban supply water or your own water installation (such as sand, dirt, rust, etc.) can be prevented by means of the filter attached to the water inlet hose.
Maintenance and cleaning Cleaning the impellers Upper impeller Clean the impellers at least once a week in Check if the holes on the upper impeller (1) order for the machine operates efficiently. are clogged. If they are clogged, remove and clean the impeller. Turn its nut to left to Lower impeller remove the upper impeller.
Maintenance and cleaning Ceiling Impeller Check if the holes on the top ceiling impeller (1) of your machine are clogged. If they are clogged, remove and clean. To remove them, slightly push them upwards and then rotate to left. To install the impeller, seat it into its slot, push slightly upwards and turn it rightwards until it is securely tightened.
Troubleshooting Machine does not start. • Power cable is unplugged. >>> Check if the power cable is plugged in. • Fuse is blown. >>> Check the fuses in your house. • Water is cut. >>> Make sure that the water inlet tap is open. •...
Page 49
Troubleshooting • Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the machine. • Machine is unloaded right after the programme is over. >>> Do not unload your machine right after washing process is completed.
Page 50
Troubleshooting Since the salt granules that will remain under the lid will dissolve during prewash, causing the lid loosen, check the lid once again at the end of the programme. There is a different odour in the machine A new machine has a peculiar odour. It will fade out after a couple of washes. •...
Page 51
Troubleshooting Detergent remains in detergent dispenser. • Detergent dispenser was damp when adding detergent. >>> Make sure that the detergent dispenser is dried well prior to filling it with detergent. • Detergent is added long before the washing process. >>> Pay attention to add detergent shortly before start-up of the washing.
Page 52
Troubleshooting A smear remains on glasses that resembles milk stain which can not be removed when wiped by hand. A bluish / rainbow appearance occurs when the glass is pointed to light. • Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse aid when adding rinse aid.
Need help?
Do you have a question about the DIN29330 and is the answer not in the manual?
Questions and answers