Notifier 002-439 Installing

Installing the Multi-Mount Enclosure

Installing the Multi-Mount Enclosure
The Multi-Mount Enclosure (PN: 002-439) is very simple to fit to a wall providing the instructions described below are The Multi-Mount Enclosure (PN: 002-439) is very simple to fit to a wall providing the instructions described below are The Multi-Mount Enclosure (PN: 002-439) is very simple to fit to a wall providing the instructions described below are The Multi-Mount Enclosure (PN: 002-439) is very simple to fit to a wall providing the instructions described below are
followed. The Enclosure is capable of housing: one CMX-10RM or MMX-10M or MCX-55 module, followed. The Enclosure is capable of housing: one CMX-10RM or MMX-10M or MCX-55 module, or up to two MRM, followed. The Enclosure is capable of housing: one CMX-10RM or MMX-10M or MCX-55 module, followed. The Enclosure is capable of housing: one CMX-10RM or MMX-10M or MCX-55 module, or up to two MRM,
MMX, CMX, ZMX or ISO-X modules, MMX, CMX, ZMX or ISO-X modules, MMX, CMX, ZMX or ISO-X modules, or one MULTI-MX module, or one IM-10 or CR-6 or SC-6 or CZ-6 module, or one MMX, CMX, ZMX or ISO-X modules, or one MULTI-MX module, or one IM-10 or CR-6 or SC-6 or CZ-6 module, or one
Serial NION Board. The Enclosure is secured to a wall using three 6mm (#12) screws. Serial NION Board. The Enclosure is secured to a wall using three 6mm (#12) screws. Serial NION Board. The Enclosure is secured to a wall using three 6mm (#12) screws. Serial NION Board. The Enclosure is secured to a wall using three 6mm (#12) screws.
Your kit should contain: Your kit should contain:
Multi-Mount Enclosure Multi-Mount Enclosure
Allen key 2mm Allen key 2mm
M3 x 10 SEM screws (5 off) M3 x 10 SEM screws (5 off)
M4 x 8 SEM screws (9 off) M4 x 8 SEM screws (9 off)
M3 x 20mm nylon spacers (5 off) M3 x 20mm nylon spacers (5 off)
M4 x 45mm nylon spacers (8 off) M4 x 45mm nylon spacers (8 off)
M3 x 6 button-hd. hex. black steel screws (8 off) PN: 775-059 M3 x 6 button-hd. hex. black steel screws (8 off) PN: 775-059
M3 nylon washers (8 off) M3 nylon washers (8 off)
Cable assembly (earth) 225mm M4 blade/ring PN: 082-160 -005 Cable assembly (earth) 225mm M4 blade/ring PN: 082-160 -005
3 3
D D
E E
F F
4 4
or or one MULTI-MX module, one MULTI-MX module,
ATTENTION ATTENTION ATTENTION ATTENTION
OBSERVE PRECAUTIONS OBSERVE PRECAUTIONS OBSERVE PRECAUTIONS OBSERVE PRECAUTIONS
FOR HANDLING FOR HANDLING FOR HANDLING FOR HANDLING
ELECTROSTATIC ELECTROSTATIC ELECTROSTATIC ELECTROSTATIC
SENSITIVE SENSITIVE SENSITIVE SENSITIVE
DEVICES DEVICES DEVICES DEVICES
PN: 002-439 PN: 002-439
PN: 334-051 PN: 334-051
PN: 775-058 PN: 775-058
PN: 776-042 PN: 776-042
PN: 423-252 PN: 423-252
PN: 423-311 PN: 423-311
PN: 790-019 PN: 790-019
C C C C
1 1
or or one IM-10 or CR-6 or SC-6 or CZ-6 module, one IM-10 or CR-6 or SC-6 or CZ-6 module,

Check Your Equipment....

Check Your Equipment.... Check Your Equipment.... Check Your Equipment....
Taking suitable precautions, before proceeding with the installation, remove Taking suitable precautions, before proceeding with the installation, remove Taking suitable precautions, before proceeding with the installation, remove Taking suitable precautions, before proceeding with the installation, remove
all packaging and inspect for any damage that may have occurred during all packaging and inspect for any damage that may have occurred during all packaging and inspect for any damage that may have occurred during all packaging and inspect for any damage that may have occurred during
transit. If no damage is evident, proceed using the instructions below. In the transit. If no damage is evident, proceed using the instructions below. In the transit. If no damage is evident, proceed using the instructions below. In the transit. If no damage is evident, proceed using the instructions below. In the
unlikely event that damage has occurred, DO NOT PROCEED, contact your unlikely event that damage has occurred, DO NOT PROCEED, contact your unlikely event that damage has occurred, DO NOT PROCEED, contact your unlikely event that damage has occurred, DO NOT PROCEED, contact your
supplier and refer to the panel Installation & Commissioning Manual. supplier and refer to the panel Installation & Commissioning Manual. supplier and refer to the panel Installation & Commissioning Manual. supplier and refer to the panel Installation & Commissioning Manual.
Observing all necessary precautions, proceed with the installation of the Observing all necessary precautions, proceed with the installation of the Observing all necessary precautions, proceed with the installation of the Observing all necessary precautions, proceed with the installation of the
Multi-Mount Enclosure. Multi-Mount Enclosure. Multi-Mount Enclosure. Multi-Mount Enclosure.

Fitting the Multi-Mount Enclosure

Fitting the Multi-Mount Enclosure Fitting the Multi-Mount Enclosure Fitting the Multi-Mount Enclosure
Proceed as follows: Proceed as follows: Proceed as follows: Proceed as follows:
1 1 Using an appropriate-sized screwdriver, remove (and discard) the three 1 1 Using an appropriate-sized screwdriver, remove (and discard) the three Using an appropriate-sized screwdriver, remove (and discard) the three Using an appropriate-sized screwdriver, remove (and discard) the three
M3 screws (position A) that secure the cover (B) to the back box (C), then M3 screws (position A) that secure the cover (B) to the back box (C), then M3 screws (position A) that secure the cover (B) to the back box (C), then M3 screws (position A) that secure the cover (B) to the back box (C), then
lift off, remove and retain the cover. lift off, remove and retain the cover. lift off, remove and retain the cover. lift off, remove and retain the cover.
2 2 2 Find a suitable location to install the enclosure, then use the dimensions 2 Find a suitable location to install the enclosure, then use the dimensions Find a suitable location to install the enclosure, then use the dimensions Find a suitable location to install the enclosure, then use the dimensions
below to measure the mounting hole positions. Using a suitable-sized below to measure the mounting hole positions. Using a suitable-sized below to measure the mounting hole positions. Using a suitable-sized below to measure the mounting hole positions. Using a suitable-sized
drilling bit for holes to take 6mm (#12) screws, drill the holes and fit wall drilling bit for holes to take 6mm (#12) screws, drill the holes and fit wall drilling bit for holes to take 6mm (#12) screws, drill the holes and fit wall drilling bit for holes to take 6mm (#12) screws, drill the holes and fit wall
plugs, then secure the back box to the wall with three 6mm (#12) screws. plugs, then secure the back box to the wall with three 6mm (#12) screws. plugs, then secure the back box to the wall with three 6mm (#12) screws. plugs, then secure the back box to the wall with three 6mm (#12) screws.
Open the knock-outs as required and remove any swarf. Open the knock-outs as required and remove any swarf. Open the knock-outs as required and remove any swarf. Open the knock-outs as required and remove any swarf.
3 3 Connect the back box to earth at the safety earth point (D). 3 Connect the back box to earth at the safety earth point (D). 3 Connect the back box to earth at the safety earth point (D). Connect the back box to earth at the safety earth point (D).
4 Use one of the M4 SEMS (E) to connect the earth lead (F) to the back box. 4 Use one of the M4 SEMS (E) to connect the earth lead (F) to the back box. 4 4 Use one of the M4 SEMS (E) to connect the earth lead (F) to the back box. Use one of the M4 SEMS (E) to connect the earth lead (F) to the back box.
A A
B B
A A
A A
1
or or up to two MRM, up to two MRM,
280.6 280.6
2 2
55 55 170.6 170.6
140.3 140.3
997-286, Issue 3 January 2003
or or one one