Sharp 61U-WP7H Service Manual page 18

61U-WP7H
55U-WP7H
2. Taking out the cathode ray tube
2-1. Open the control cover. While pulling it toward yourself, undo the catches from the swivel shaft.
2-2. Remove the two screws from the control decorative panel. Lift and tilt the panelÕ s bottom toward you and
detach the panel.
Left View
2-3. Undo the four Velcro-taped points and detach the speaker
grille.
2-4. Remove the four screws from the control panel. Detach the control panel.
2-5. Remove the three screws from the operation PWB. Disconnect all the connectors, undo the hooks and
detach the operation PWB.
2-6. Remove the four screws from the hard board. Detach the hard board.
Hard board
2-6
2-1
Control cover
Control panel
2-4 2-4
2-6
Right View
2-1
Speaker grille
Operation PWB
18
2-2
Control decorative panel
2-5