BaBylissPro Nano Titanium MiraCurl BABNTMC1C Manual

Table of Contents

Contents

1 IMPORTANT SAFETY INSTRUCTIONS
2 INTRODUCTION
3 GET TO KNOW YOUR PROFESSIONAL STYLER
4 OPERATING INSTRUCTIONS
5 TEMPERATURE SETTINGS
6 TIME SETTINGS
7 AUDIO OFF SETTING
8 CURL DIRECTION SETTING (Right/Left/Alternate)
9 INSTRUCTIONS FOR USE
10 SMART TECH
11 USER MAINTENANCE
12 CLEANING & MAINTENANCE
13 STORAGE
14 NOTICE
15 Documents / Resources
- 15.1 Download manual

IMPORTANT SAFETY INSTRUCTIONS

For your safety and continued enjoyment of this product, always read the instruction book carefully before using.

When using electrical appliances, especially when children are present, basic safety precautions should always be taken, including the following:

READ ALL INSTRUCTIONS BEFORE USING.
KEEP AWAY FROM WATER.

Any appliance is electrically live even when the switch is off. To reduce the risk of death by electric shock:

ALWAYS UNPLUG APPLIANCE IMMEDIATELY AFTER USING.
DO NOT USE WHILE BATHING OR IN THE SHOWER.
DO NOT PLACE OR STORE APPLIANCE WHERE IT CAN FALL OR BE PULLED INTO A TUB OR SINK.
DO NOT PLACE IN, OR DROP INTO, WATER OR OTHER LIQUIDS.
IF AN APPLIANCE FALLS INTO WATER, UNPLUG IT IMMEDIATELY. DO NOT REACH INTO THE WATER.

To reduce the risk of burns, electrocution, fire, or injury to persons:

THIS APPLIANCE SHOULD NEVER BE LEFT UNATTENDED WHEN PLUGGED IN.
DO NOT PULL, TWIST, OR WRAP LINE CORD AROUND APPLIANCE.
THIS APPLIANCE SHOULD NOT BE USED BY, ON, OR NEAR CHILDREN OR INDIVIDUALS WITH CERTAIN DISABILITIES.
USE THIS APPLIANCE ONLY FOR ITS INTENDED USE, AS DESCRIBED IN THIS MANUAL. DO NOT USE ATTACHMENTS NOT RECOMMENDED BY THE MANUFACTURER.
NEVER OPERATE THIS APPLIANCE IF IT HAS A DAMAGED CORD OR PLUG, IF IT IS NOT WORKING PROPERLY, IF IT HAS BEEN DROPPED OR DAMAGED, OR DROPPED INTO WATER. RETURN THE APPLIANCE TO AN AUTHORIZED SERVICE CENTER FOR EXAMINATION AND REPAIR.
KEEP THE CORD AWAY FROM HEATED SURFACES.
NEVER USE WHILE SLEEPING.
NEVER DROP OR INSERT ANY OBJECT INTO ANY OPENING.
DO NOT USE OUTDOORS OR OPERATE WHERE AEROSOL (SPRAY) PRODUCTS ARE BEING USED OR WHERE OXYGEN IS BEING ADMINISTERED.
DO NOT USE AN EXTENSION CORD WITH THIS APPLIANCE.
THE OPENING OF THE APPLIANCE IS HOT WHEN IN USE. DO NOT PUT FINGERS OR OTHER OBJECTS INTO THE OPENING AT ANY TIME.
DO NOT PLACE THE APPLIANCE ON ANY SURFACE WHILE IT IS OPERATING.
IN THE EVENT THE APPLIANCE IS LEFT SWITCHED ON, IT WILL AUTOMATICALLY
SHUT OFF AFTER 60 MINUTES. IF YOU WISH TO CONTINUE USING THE APPLIANCE AFTER THIS TIME, SIMPLY SLIDE THE SWITCH TO OFF POSITION AND THEN SLIDE THE SWITCH TO THE RELEVANT SETTING TO TURN THE POWER ON.

SAVE THESE INSTRUCTIONS

INTRODUCTION

This appliance is intended for professional use. Use on alternating current (60 hz) only. Standard appliances are designed to operate at 120 volts ac.
This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

NANO TITANIUM^TM

Your nano titanium™ miracurl® has many benefits. Nano titanium is an exceptional conductor of heat and is stable in ultra-high temperatures. The nano titanium technology utilizes micro particles of titanium and ceramic, providing the ultimate benefits for beautiful, healthy-looking hair. Nano titanium yields maximum far-infrared heat, penetrating the hair from within for gentle styling without damaging hair. Nano titanium emits natural ions for faster stying, locking in hair's own natural moisture. This nano titanium™ iron will give your hair a smooth, silky shine while eliminating frizz.

BaBylissPRO™ MiraCurl^®

Effortlessly create long-lasting beautiful curls, with babylisspro™ miracurl^®. Hair is automatically drawn into the nano titanium curl chamber where it is softly held and heated from all directions to effortlessly form the curl. Then, simply release. The result is beautiful, free-flowing curls.

FEATURES

Nano Titanium curl chamber for smooth curl creation
3 timer settings with audio beep indicator for different curl effects
3 heat settings; 375°F, 410°F and 450°F for long-lasting results
Powerful heating system ready to use in seconds with ultra-fast heat recovery
Curl direction control for either a uniform or natural finish (Right/Left/Alternate)
Suitable for shorter and longer hair lengths
On/Off switch with ON indicator light
Heat ready indicator
Auto shutoff
Sleep mode
Motion sensor
8 ft. 360° swivel cord

GET TO KNOW YOUR PROFESSIONAL STYLER

Model BABNTMC1
GET TO KNOW YOUR PROFESSIONAL STYLER

Powerful heating system – ready in seconds with ultra-fast heat recovery.

Smart Tech^® safeguard and energy saver: Auto Shut Jff + Sleep Mode + Motion Sensor

You can create a variety of curls with different combinations of heat, time and curl direction.
With MiraCurl^®, it's easy to make miracles!

OPERATING INSTRUCTIONS

The MiraMurl® will create many different curl effects in the hair. It is easy to experiment with the different settings to achieve your desired results. Always ensure that the sections of hair you want to curl are no wider than 1 inch wide. The type of curl will depend on the temperature selected and the timer setting, which dictates the amount of time the hair is kept inside the curl chamber.

TEMPERATURE SETTINGS

There are 3 temperature settings to select from 375°F, 410°F and 450°F. We recommend you always start with the lowest temperature setting and increase the level of heat as required.

Setting I (375°F) - for delicate, fine or colored hair
Setting II (410°F) - for normal textured hair
Setting III (450°F) - for thick or wavy hair

TIME SETTINGS

There are 3 time settings with an automatic beep indicator. These different settings will give different curl effects. The longer the hair is held inside the curl chamber, the more defined the curl will be. But results will also vary according to hair type. Use the following as a guide:

Setting 8 (8 seconds = 3 beeps) - for loose waves
Setting 10 (10 seconds = 4 beeps) - for soft curls
Setting 12 (12 seconds = 5 beeps) - for more defined curls
At the end, there will be 4 quick beeps in succession to indicate time is up, and it's ready to release hair.

AUDIO OFF SETTING

You can turn off the automatic beep indicator if it is not required by sliding the timer switch to 0.

warning NOTE: When the 0 setting is selected, there will be no beep indicator to advise when to release the styler. Take extra care when using this setting.

CURL DIRECTION SETTING (Right/Left/Alternate)

Use the curl direction control to choose either a uniform or natural finish. Select the curl direction by sliding the switch to either left (L) or right (R) or alternate (A).
(L) starts the curl to to the left, counterclockwise.
(R) starts the curl to the right, clockwise. You can also select the opposite direction on each side to create a symmetrical look.

When styling the left side of the hair, slide the curl direction switch to the left position (L). When styling the right side of the hair, slide the switch to the right position (R). This ensures that the curl sits toward the face on both sides of the head and will give a more uniform style. For a more natural look, select the alternate setting (A). This will alternate the direction after each curl.

INSTRUCTIONS FOR USE

Ensure hair is dry and combed through.
Plug the styler into a 120V outlet.
Slide the temperature switch to the required heat setting.
The styler is ready for use when the ON indicator light has stopped flashing.
There are 3 time settings; choose the optimum setting for your hair type. alternatively, switch the time setting to 0.
Select the curl direction by sliding the control to either position L, R or A.
Separate a section of hair that is no wider than 1 inch (Figure a).

Ensure that the section is clean, dry and combed through.
Please note the styler must be positioned into the hair with the opening of the curl chamber facing toward the head (Figure b).
Position the styler where you want the curl to start. the hair section must be straight, and placed neatly through the center of the styler (Figures c and d).
Once the hair is in place, let go of the hair section and close the handle to allow the hair to be automatically taken into the curl chamber (Figure e).

NOTE: if you continue to hold the hair section after closing the handle the miracurl^® will stop and beep to indicate that you must release the tension on the hair. If you have taken too much hair, or hair is not neatly going through the center of the appliance, the miracurl^® will again stop and beep to indicate a problem. This safety feature ensures there will be no tangles.
The hair is automatically drawn into the ceramic curl chamber where it is softly held and heated from all directions to effortlessly form the curl.
If you are using the timer setting, the automatic beep indicator will start as soon as the handles are closed together. There will be a series of individual beeps. hold the styler still, with the handles held together until the end of the individual beeps. There will then be four quick beeps in succession. this indicates that the time is up and you can remove the styler from the hair.
NOTE: When the audio off 0 setting is selected, there will be no beep indicator. there will just be a warning beep at 15 seconds.
It is very important that you release the handles fully, and then gently pull the styler away from the head to free the hair and reveal the curl (Figure F).

NOTE: Always release the handles first to set the curl free; if you pull away before you open the handles, the curl will be straightened out.
To allow the curl to set, do not comb or brush the hair until it cools.
Repeat around the head until you have the amount of curls desired.

SMART TECH^®

MiraMurl® comes with 3 functions for added safety and energy savings.

Auto Shut Off: if the appliance is switched on for more than 60 minutes continuously, it will automatically switch off. If you wish to continue using the appliance, simply slide the switch to off position and then slide the switch to the relevant setting to turn the power on.
Sleep Mode: After 20 minutes of idle time, the temperature drops to around 300°F/150°C.
Motion Sensor: move the iron and close it to trigger the reheat to set temperature.

USER MAINTENANCE

The appliance may require cleaning due to a buildup of residue from hair products.

Ensure the unit is switched off, unplugged and cool.
Using a damp cloth and mild detergent or soap, wipe the appliance.
Ensure the unit has dried thoroughly before re-using.

Never allow the power supply cord to be pulled or twisted. Never wrap the cord around the unit. Damage will occur at the high flex point of entry into the unit, causing it to rupture and short circuit. Inspect the cord frequently for damage. Stop use immediately if damage is visible or if unit stops or operates intermittently.

CLEANING & MAINTENANCE

It is very important that you use the cleaning tool included with your iron to regularly clean the curl chamber. This will prevent a buildup of product to ensure the curls produced are always perfectly formed.

Ensure the appliance is switched off, unplugged and cool.
Lightly dampen the cleaning tool with warm water and mild detergent or soap.
Insert the tool fully into the curl chamber cavity as per the diagrams below.
Rotate the tool around the curl chamber to remove any buildup of product.
Ensure the appliance has dried thoroughly before re-using.
The cleaning tool can be used numerous times; just remove the felt pads, rinse them in warm, soapy water and let dry before using again.

STORAGE

When not in use, your appliance is easy to store. allow unit to cool, then simply put back in the box, and store out of reach of children in safe, dry location. Do not jerk or strain cord at plug connections.

NOTICE

THIS PRODUCT IS EQUIPPED WITH AN INSTANT HEAT CIRCUITRY. STATE-OF-THE-ART TECHNOLOGY ALLOWS THE HEATER TO REACH THE OPERATING TEMPERATURE IN LESS THAN ONE MINUTE.
DO NOT LEAVE PRODUCT ON OR PLUGGED IN WHILE NOT IN USE. UNIT WILL BURN OUT IF POWER IS KEPT ON FOR AN EXTENDED PERIOD OF TIME. WARRANTY WILL BE VOIDED. TURN UNIT OFF AND UNPLUG WHEN NOT IN USE.

IF YOU THINK THE POWER IS OFF WHEN THE SWITCH IS OFF, YOU'RE WRONG.
KEEP AWAY FROM WATER

Everyone knows that electricity and water are a dangerous combination, but did you know that an electrical appliance is still electrically live even if the switch is off? If the plug is in, the power is on. So when you are not using your appliances, keep them unplugged.
ALWAYS UNPLUG SMALL APPLIANCES.