Table of Contents
Advertisement
Formatting an SD Memory Card or Internal Memory
The term "Formatting" means preparing an "SD memory card" to record images; this process is also called
"initialization". This utility formats an SD memory card or the internal memory and erases all stored images
and data.
1. Rotate the mode dial to
the power switch.
[Set-up1] is displayed.
2. Use the four-way controller ( ) to select [Format], then press the
button.
3. Use the four-way controller (
button to confirm.
When you format an SD memory card, be aware that all data on the SD memory card will be erased. Protected images are
also erased.
To format the internal memory, do not insert an SD memory card into the camera. Otherwise, you will format the SD
memory card.
An SD memory card having any problem cannot be properly formatted.
and turn your camera on by pressing
) to select [OK], then press the
EN-27
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Optio E10 and is the answer not in the manual?
Questions and answers
My Optio E-10 shuts itself off after a few seconds. What would cause this?
The Pentax Optio E10 shuts itself off after a few seconds because it incorrectly reads the voltage of the batteries. Even with fully charged AA alkaline batteries measuring 1.5 volts each, the camera indicates that the battery is almost dead. This issue causes the camera to either shut off immediately or fail to turn on at all.
This answer is automatically generated