Table of Contents
Advertisement
PREPARING THE CAMERA
Installing the Batteries
You can use 2 AA size batteries (alkaline or Ni-MH rechargeable) to power the camera. Make sure that the
power of the digital camera is off before inserting or removing the batteries.
1. Make sure the camera is turned off.
2. Open the battery cover.
3. Insert the batteries in the correct orientation as shown in the
illustration.
4. Close the battery cover.
To remove the batteries, turn the camera off before removing
batteries and hold the camera with the battery cover facing
upward, then open the battery cover.
Be careful not to drop the batteries when opening or closing the battery cover.
Due to the characteristics of AA alkaline battery, camera performance may deteriorate. AA alkaline battery is not
recommended except in emergencies and checking the camera's functionality.
EN-18
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Optio E10 and is the answer not in the manual?
Questions and answers
My Optio E-10 shuts itself off after a few seconds. What would cause this?
The Pentax Optio E10 shuts itself off after a few seconds because it incorrectly reads the voltage of the batteries. Even with fully charged AA alkaline batteries measuring 1.5 volts each, the camera indicates that the battery is almost dead. This issue causes the camera to either shut off immediately or fail to turn on at all.
This answer is automatically generated