Upgrade Has Been Terminated; The Date And Time Is Not Adjusted Automatically By The Ntp Server - Sanyo VCC-HD2500P Manual

Upgrade has been terminated.

Upgrade has been interrupted due to power off, network fault, or other problem during the process.
Redo the upgrade by proceeding as follows.
1
Turn on the camera again.
2 Access the camera again.
3
Check the firmware version on [FIRMWARE UPDATE] in OPTION SETTINGS screen.
* If the version number is updated: Upgrade is complete.
* If the version number is not updated: Redo the upgrade.

The date and time is not adjusted automatically by the NTP server.

1 The GATEWAY settings are not configured correctly.
Select NETWORK and configure the [GATEWAY] settings again.
2
The NTP server address is not configured correctly.
Select CLOCK and configure the [NTP SERVER ADDRESS] settings again.
3 Adjustment by NTP is not set as the method for automatic time adjustment.
Select CLOCK and set [CLOCK ADJUST] to [ON (NTP)].
The date and time information indicated on the live screen does not reflect the clock settings
configured on the [CLOCK SETTINGS] screen.
It is recommended that you delete temporary Internet files.
To do so, in Internet Explorer, click [Internet Options] in the [Tools] menu and then delete
temporary files, history, cookies, saved passwords, and web form information from the [General]
tab.
Q&A 11/11