Sanyo VPC-HD2000ABK Instruction Manual page 99

3
Select the desired flash operation, and press the SET button.
h This completes the flash operation setting.
4
Press the [
CAUTION
Do not touch the flash unit when shooting
i The flash unit becomes very hot and may cause a burn. Avoid touching the
flash unit when shooting.
HINT
i The flash cannot be used during video clip recording.
i By assigning an operation shortcut to the SET button (pages 138 and
142), you can change the flash mode from the Recording Screen (in the
NORMAL mode).
] button to take the picture.
78
English