Sanyo VPC-HD2000ABK Instruction Manual page 202

TROUBLESHOOTING
The image is
too bright.
The image is
not in focus.
Viewing
images
181
English
Problem
The forced
flash mode is
selected.
The subject
was too bright.
The ISO
sensitivity
setting is
incorrect.
The subject is
too close to the
camera.
The focus
setting is not
correct.
The camera
moved when
the [
button was
pressed.
(camera
shake)
The focus is
not locked
properly.
The lens is
dirty.
Cause
Select a
different flash
mode.
Use the
exposure
compensation
function.
Set the ISO
sensitivity to
=.
Capture the
image with the
subject within
the
photographable
range.
Select the
correct focus
setting for your
needs.
Hold the
camera
] correctly and
slowly press
the [
button halfway
to lock the
focus. Then
press the [
button all the
way to capture
the image.
Clean the lens.
Reference
Action
page
60, 77
112
62, 106
62, 72,
105
]
68, 75
]
—