National Instruments SET-2090 Technical Description
  1. Manuals
  2. Brands
  3. National Instruments Manuals
  4. Computer Hardware
  5. SET-2090
  6. Technical description

National Instruments SET-2090 Technical Description

32ch pass through
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
TECHNICAL DESCRIPTION
SET-2090
32CH Pass Through
This document is a technical description of the SET-2090.
Note Before you begin, complete the software and hardware installation procedures
applicable to your application.
Note The guidelines in this document are specific to the SET-2090. The other components in
the system might not meet the same safety ratings. Refer to the documentation of each com-
ponent in the system to determine the safety and EMC ratings for the entire system.
www.smart-e-tech.com
1 of 10
Issue 03
30/07/2019
0X
-2090
Pass Through
32 Channel
PWR
MORE INFORMATION ON OUR WEBSITE:
www.smart-e-tech.com/slsc
SET-2090 Technical Description
RDY

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SET-2090 and is the answer not in the manual?

Questions and answers

Related Manuals for National Instruments SET-2090

Summary of Contents for National Instruments SET-2090

  • Page 1 Note Before you begin, complete the software and hardware installation procedures applicable to your application. Note The guidelines in this document are specific to the SET-2090. The other components in the system might not meet the same safety ratings. Refer to the documentation of each com- ponent in the system to determine the safety and EMC ratings for the entire system.

  • Page 2: Safety Guidelines

    Safety Guidelines Caution Do not operate the SET-2090 in a manner not specified in this document. Product misuse can result in a hazard. You can compromise the safety protection built into the product if the product is damaged in any way. If the product is damaged, return it for repair.
  • Page 3 Description The SET-2090 device is an experimental card for NI-SLSC and provides 32 differential inputs. The input signals can be configured by customers. Each input channel can be tested, conditioned or measured in different ways. Various inductors, filters, pull-up or pull-down resistors can be used for this purpose. In standard configuration, the input signals are transmitted directly to the output.
  • Page 4 P4.2- P0.1+ P4.1+ P0.3+ P4.3+ P0.1- P4.1- P0.0+ P4.0+ P0.3- P4.3- P0.0- P4.0- Table 1. JR2 Connector Pin Assignments Signal Description Px.y Line y Port x Ground connection No connection www.smart-e-tech.com SET-2090 Technical Description 4 of 10 Issue 03 30/07/2019...
  • Page 5 P7.0+ I/O_28+ P3.0- I/O_12- P7.0- I/O_28- P3.1+ I/O_13+ P7.1+ I/O_29+ P3.1- I/O_13- P7.1- I/O_29- P3.2+ I/O_14+ P7.2+ I/O_30+ P3.2- I/O_14- P7.2- I/O_30- P3.3+ I/O_15+ P7.3+ I/O_31+ P3.3- I/O_15- P7.3- I/O_31- www.smart-e-tech.com SET-2090 Technical Description 5 of 10 Issue 03 30/07/2019...
  • Page 6 Table 3. XJ2 Connector Pin Assignments I/O_1- I/O_1+ I/O_0- I/O_0+ I/O_3- I/O_3+ I/O_2- I/O_2+ I/O_5- I/O_5+ I/O_4- I/O_4+ I/O_7- I/O_7+ I/O_6- I/O_6+ I/O_9- I/O_9+ I/O_8- I/O_8+ I/O_11- I/O_11+ I/O_10- I/O_10+ I/O_13- I/O_13+ I/O_12- I/O_12+ www.smart-e-tech.com SET-2090 Technical Description 6 of 10 Issue 03 30/07/2019...
  • Page 7 I/O_22+ I/O_25- I/O_25+ I/O_24- I/O_24+ I/O_27- I/O_27+ I/O_26- I/O_26+ I/O_29- I/O_29+ I/O_28- I/O_28+ I/O_31- I/O_31+ I/O_30- I/O_30+ Table 4. XJ2 Connector Signal Descriptions Signal Description Input/Output Ground connection No connection www.smart-e-tech.com SET-2090 Technical Description 7 of 10 Issue 03 30/07/2019...
  • Page 8 Table 2. XJ2 Connector Pin Assignments Signal Pins Instrument_0+ Instrument_0- Instrument_1+ Instrument_1- Fault_D Fault_C Fault_B Fault_A www.smart-e-tech.com SET-2090 Technical Description 8 of 10 Issue 03 30/07/2019...

  • Page 9: Led Behavior

    Checking the external power supply if used Solid amber Waiting till boot process is finished Blinking amber - Waiting till communication is finished if communication does not finish, shut down all operations and reboot chassis www.smart-e-tech.com SET-2090 Technical Description 9 of 10 Issue 03 30/07/2019...

  • Page 10: Hardware Specifications

    Any RTI marked 61076-101 Environmental Property Condition Value Comment Operating humidity Relative, non-condensing 10%-90% Storage humidity Relative, non-condensing 5%-95% Operating temperature Forced-air cooling from 0°C-85°C chassis Storage temperature -40°C-100°C Maximum altitude 2000m 10 of 10 www.smart-e-tech.com SET-2090 Technical Description Issue 03 30/07/2019...

Table of Contents