Table of Contents
Advertisement
If uncheck the function, you should set the IPv4 address, IPv4 subnet mask, IPv4 default
gateway, Mac address, and MTU.
If you check the function, the system will allocate the IPv4 address, IPv4 subnet mask, the IPv4
default gateway automatically.
DNS Server
Set the preferred DNS server and the Alternate DNS server according to your actual need.
Set Wi-Fi Parameters
Set the Wi-Fi parameters for device wireless connection.
Steps
Note
The function should be supported by the device.
1. Click Configuration → Network → Network Settings → Wi-Fi .
2. Check Wi-Fi.
3. Add Wi-Fi.
- Click Manual Add, and enter SSID and Security Mode.
4. Select a Wi-Fi
- Click Connect of a Wi-Fi in the list and enter the Wi-Fi password.
- Click Manual Add, and enter SSID and Security Mode. Click OK.
5. Optional: Set the WLAN parameters.
Access Control Terminal User Manual
Figure 8-3 Wi-Fi Settings Page
28
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the DS-K1T805MBWX and is the answer not in the manual?
Questions and answers